meta mtk meta工具连不上能写入NSFT 标志位吗
点击联系发帖人
时间：2018-04-23 17:47
【图文】手机射频测试_百度文库
两大类热门资源免费畅读
续费一年阅读会员，立省24元！
手机射频测试
&&手机射频测试
登录百度文库，专享文档复制特权，财富值每天免费拿！
你可能喜欢当前位置： >>
2G+TD的cfg说明
[META version] META version= ver 6.1.0 [8960 Initialization] 8960 GPIB Address =GPIB0::15::INSTR Time Out =5000 GSM400 cable loss = -0.8 GSM850 cable loss = -1.5 GSM900 cable loss = -1.5 DCS1800 cable loss = -2.2 PCS1900 cable loss = -2.2 TDSCDMA MHz cable loss = -2.0 TDSCDMA MHz cable loss = -2.0 TDSCDMA MHz cable loss = -1.0 TDSCDMA MHz cable loss = -1.0 TDSCDMA MHz cable loss = -2.0 WCDMA BAND1 input cable loss = -3 WCDMA BAND1 output cable loss = -3 WCDMA BAND2 input cable loss = -3.4 WCDMA BAND2 output cable loss = -3.4 WCDMA BAND4 input cable loss = -3.4 WCDMA BAND4 output cable loss = -3.4 WCDMA BAND5 input cable loss = -3.4 WCDMA BAND5 output cable loss = -3.4 WCDMA BAND8 input cable loss = -3.4 WCDMA BAND8 output cable loss = -3.4 ;WCDMA BAND1 input cable loss = -2.3 ;WCDMA BAND1 output cable loss = -2.3 ;WCDMA BAND2 input cable loss = -2.2 ;WCDMA BAND2 output cable loss = -2.2 ;WCDMA BAND4 input cable loss = -2.2 ;WCDMA BAND4 output cable loss = -2.2 ;WCDMA BAND5 input cable loss = -1.5 ;WCDMA BAND5 output cable loss = -1.5 ;WCDMA BAND8 input cable loss = -1.5 ;WCDMA BAND8 output cable loss = -1.5 [CMU200 Initialization] CMU200 GPIB Address =GPIB0::20::INSTR Time Out =5000 GSM400 input cable loss = 0.7 GSM850 input cable loss = 6.2 GSM900 input cable loss = 6.2 DCS1800 input cable loss = 6.3CMU200 和电脑数据采集卡之间的连接地址 PCS1900 input cable loss = 6.3 2G 输入校准线损值 GSM400 output cable loss = 0.7 GSM850 output cable loss = 6.2 GSM900 output cable loss = 6.2 DCS1800 output cable loss = 6.3 PCS1900 output cable loss = 6.3 2G 输出校准线损值 WCDMA BAND1 input cable loss = 0.5 WCDMA BAND1 output cable loss = 0.5 WCDMA BAND2 input cable loss = 0.5 WCDMA BAND2 output cable loss = 0.5 WCDMA BAND4 input cable loss = 0.5 WCDMA BAND4 output cable loss = 0.5 WCDMA BAND5 input cable loss = 0.2 WCDMA BAND5 output cable loss = 0.2 WCDMA BAND8 input cable loss = 0.2 WCDMA BAND8 output cable loss = 0.2 WCDMA BAND11 input cable loss = 0.8 WCDMA BAND11 output cable loss = 0.8[Frequency Bank] 2G 校准频段选择，一般入库 4 频段选择 1E（其他选择为 0C） ，每行加分 号则无效，即不会进行校准 bank = 0x0C ; GSM450 0x01 ; GSM850 0x02 ; GSM900 0x04 ; DCS ; PCS [C0 for each Bank] arfcn_C0_GSM = 65 arfcn_C0_DCS = 700 arfcn_C0_PCS = 660 arfcn_C0_GSM850 = 190[Downlink power] ; For LNA high mode P_DL = -60 ; For LNA middle mode CELL_POWER_2G_LNA_MIDDLE = -45 ; For low middle mode CELL_POWER_2G_LNA_LOW = -30 [W coefficient calibration] ; W_NEGATIVE_IF_CALIBRATION_BAND=GSM, GSM850, DCS, PCS W_NEGATIVE_IF_CALIBRATION_BAND=GSM W_RETRY_COUNT=23 W_CALIBRATION_MODE=16[AFC Calibration] ;AFC_BAND: GSM, DCS, PCS, GSM850 AFC_BAND = GSM AFC_ARFCN = 65 N_AFC = 20 EXTRA_FB = 5 DAC1=4000 DAC2=5000 CRYSTAL_DAC1=4200 CRYSTAL_DAC2=4800 [AFC table] MAX_INIT_AFC_DAC = 6000 MIN_INIT_AFC_DAC = 3000 MAX_AFC_SLOPE = 10.0 MIN_AFC_SLOPE =3.0 [Crystal AFC Calibration] ;CRYSTAL_AFC_BAND: GSM, DCS, PCS, GSM850 CRYSTAL_AFC_BAND = GSM CRYSTAL_AFC_ARFCN = 65 CRYSTAL_AFC_GSM850_PCL = 14 CRYSTAL_AFC_GSM900_PCL = 14 CRYSTAL_AFC_DCS1800_PCL = 7 CRYSTAL_AFC_PCS1900_PCL = 7 CRYSTAL_AFC_CAL_DAC = 4500 CRYSTAL_AFC_CHECK_DAC1 = 0 CRYSTAL_AFC_CHECK_DAC2 = 8191 CRYSTAL_AFC_MIN_FREQ_ERR_PPM = -10.0 CRYSTAL_AFC_MAX_FREQ_ERR_PPM = 10.0 CRYSTAL_AFC_MAX_AFC_TRACK_INIT_FREQ_ERR = 20 CRYSTAL_AFC_FREQ_ERR_MEASUSE_COUNT = 10 CRYSTAL_AFC_TRX_OFFSET_RECURSIVE_TIMES = 20 MAX_CRYSTAL_CAL_CAP_ID = 255 MIN_CRYSTAL_CAL_CAP_ID = 0 CRYSTAL_AFC_MAX_CAP_ID = 255 CRYSTAL_AFC_MIN_CAP_ID = 0[LPM Calibration] DCXO_LPM_CLOAD_FREQ_MIN=20000 DCXO_LPM_CLOAD_FREQ_MAX=200000 ;wpO w1309 P? META tool ?Τ support 32k-less ?闽[RX measurement samples] N_PM = 5 M_PM = 4 [RX path loss table] GSM850_MAX_RX_LOSS = 15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.0000, GSM850_MIN_RX_LOSS = -15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.00 00, GSM900_MAX_RX_LOSS = 15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.0000, GSM900_MIN_RX_LOSS = -15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.00 00, DCS1800_MAX_RX_LOSS = 15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.0000, DCS1800_MIN_RX_LOSS = -15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.00 00, PCS1900_MAX_RX_LOSS = 20.000,20.000,20.000,20.000,20.000,20.000,20.000,20.000,20.000,20.000,20.000,20.0000, PCS1900_MIN_RX_LOSS = -20.000,-20.000,-20.000,-20.000,-20.000,-20.000,-20.000,-20.000,-20.000,-20.000,-20.000,-20.00 00, GSM850_MAX_RX_LOSS_MIDDLE = 15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.0000, GSM850_MIN_RX_LOSS_MIDDLE = -15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.00 00, GSM900_MAX_RX_LOSS_MIDDLE = 15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.0000, GSM900_MIN_RX_LOSS_MIDDLE = -15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.00 00, DCS1800_MAX_RX_LOSS_MIDDLE = 15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.0000, DCS1800_MIN_RX_LOSS_MIDDLE = -15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.00 00, PCS1900_MAX_RX_LOSS_MIDDLE = 20.000,20.000,20.000,20.000,20.000,20.000,20.000,20.000,20.000,20.000,20.000,20.0000, PCS1900_MIN_RX_LOSS_MIDDLE = -20.000,-20.000,-20.000,-20.000,-20.000,-20.000,-20.000,-20.000,-20.000,-20.000,-20.000,-20.00 00, GSM850_MAX_RX_LOSS_LOW = 15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.0000, GSM850_MIN_RX_LOSS_LOW = -15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.00 00, GSM900_MAX_RX_LOSS_LOW = 15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.0000, GSM900_MIN_RX_LOSS_LOW = -15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.00 00, DCS1800_MAX_RX_LOSS_LOW = 15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.0000, DCS1800_MIN_RX_LOSS_LOW = -15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.00 00, PCS1900_MAX_RX_LOSS_LOW = 20.000,20.000,20.000,20.000,20.000,20.000,20.000,20.000,20.000,20.000,20.000,20.0000, PCS1900_MIN_RX_LOSS_LOW = -20.000,-20.000,-20.000,-20.000,-20.000,-20.000,-20.000,-20.000,-20.000,-20.000,-20.000,-20.00 00, [TX IQ table] TX_IQ_MEASUREMENT_COUNT = 20 ;TX_IQ_BAND: GSM, DCS, PCS, GSM850 TX_IQ_BAND = GSM TX_IQ_ARFCN = 65 TX_IQ_PCL = 15 TX_IQ_DC_OFFSET_MAX = -38 TX_IQ_GAIN_IMBALANCE_MAX = -35 ; The following setting is for MT6140B TX_IQ_BAND_HIGH = DCS TX_IQ_ARFCN_HIGH = 700 TX_IQ_PCL_HIGH = 5 TX_IQ_DC_OFFSET_MAX_HIGH = -38 TX_IQ_GAIN_IMBALANCE_MAX_HIGH = -35 [TX PCL table] 功率 GSM850_CAL_PCL = 17, 12, 5, GSM850_2CAL_PCL = 19, 5, GSM850_PCL = 19,18,17,16,15,14,13,12,11,10,9,8,7,6,5, GSM850_CHECK_PCL = 19,18,17,16,15,14,13,12,11,10,9,8,7,6,5, GSM850_MAX_P = 6,8,10,12,14,16,18,20,22,24,26,28,30,32,33, 校准浮动上限 GSM850_WANTED_P = 5,7,9.1,11,13,15,17,19,21,23,25,27,29,31,32.5, 实测值 GSM850_MIN_P = 4,6,8,10,12,14,16,18,20,22,24,26,28,30,31.5 校准浮动下限 GSM850_C = 2,2,2,2,2,3,3,3,3,3,3,3,3,3,3,3, GSM850_CORRECTION = 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, GSM850_EPSK_CAL_PCL = 12, 10, 6, GSM850_EPSK_2CAL_PCL = 19, 5, GSM850_EPSK_4CAL_PCL = 19,14,12,8, GSM850_EPSK_PCL = 19,18,17,16,15,14,13,12,11,10,9,8,7,6,5, GSM850_EPSK_CHECK_PCL = 19,18,17,16,15,14,13,12,11,10,9,8,7,6,5, GSM850_EPSK_MAX_P = 6,8,10,12,14,16,18,20,22,24,26,27.1,27.1,27.1,27.1, GSM850_EPSK_WANTED_P = 5,7,9,11,13,15,17,19,21,23,24.2,26.5,26.5,26.5,26.5, EGPRS 实测 GSM850_EPSK_MIN_P = 4,6,8,10,12,14,16,18,20,22,23,25.1,25.1,25.1,25.1, GSM850_EPSK_C = 32,32,32,32,32,32,32,32,32,32,32,32,32,32,32,32, GSM850_EPSK_CORRECTION = 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, GSM850 EDGE TPC PA GAIN MAX=50,50,50,50,50,50,50,50,50,50,50,50,50,50,50,50, GSM850 EDGE TPC PA GAIN MIN=0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, GSM900_CAL_PCL = 17, 12, 5, GSM900_2CAL_PCL = 19, 5, GSM900_PCL = 19,18,17,16,15,14,13,12,11,10,9,8,7,6,5, GSM900_CHECK_PCL = 19,18,17,16,15,14,13,12,11,10,9,8,7,6,5, GSM900_MAX_P = 6,8,10,12,14,16,18,20,22,24,26,28,30,32,33, GSM900_WANTED_P = 5.1,7,9,11,13,15,17,19,21,23,25,27,29,31,32.5, GSM900_MIN_P = 4,6,8,10,12,14,16,18,20,22,24,26,28,30,32 GSM900_C = 2,2,2,2,2,3,3,3,3,3,3,3,3,3,3,3, GSM900_CORRECTION = 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, GSM900_EPSK_CAL_PCL = 12, 10, 6, GSM900_EPSK_2CAL_PCL = 19, 5, GSM900_EPSK_4CAL_PCL = 19,14,12,8, GSM900_EPSK_PCL = 19,18,17,16,15,14,13,12,11,10,9,8,7,6,5, GSM900_EPSK_CHECK_PCL = 19,18,17,16,15,14,13,12,11,10,9,8,7,6,5, GSM900_EPSK_MAX_P = 6,8,10,12,14,16,18,20,22,24,26,27.1,27.1,27.1,27.1, GSM900_EPSK_WANTED_P = 5,7,9,11,13,15,17,19,21,23,24.2,26.5,26.5,26.5,26.5, GSM900_EPSK_MIN_P = 4,6,8,10,12,14,16,18,20,22,23.5,25,25,25,25, GSM900_EPSK_C = 32,32,32,32,32,32,32,32,32,32,32,32,32,32,32,32, GSM900_EPSK_CORRECTION = 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, GSM900 EDGE TPC PA GAIN MAX=50,50,50,50,50,50,50,50,50,50,50,50,50,50,50,50, GSM900 EDGE TPC PA GAIN MIN=0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, DCS1800_CAL_PCL = 13, 8, 1, DCS1800_2CAL_PCL = 15, 0, DCS1800_PCL = 15,14,13,12,11,10, 9, 8, 7, 6, 5,4,3,2,1,0, DCS1800_CHECK_PCL = 15,14,13,12,11,10, 9, 8, 7, 6, 5,4,3,2,1,0, DCS1800_MAX_P = 2,3.3,5,7,9,11,13,15,17,19,21,23,25,27,29,31, DCS1800_WANTED_P = 0.7,2.3,4.1,6,8,10,12,14,16,18,20,22,24,26,28,29.5, DCS1800_MIN_P = -0.5,1.3,3.1,5,7,9,11,13,15,17,19,21,23,25,27,29, DCS1800_C = 2,2,2,2,3,3,3,3,3,3,3,3,3,3,3,3, DCS1800_CORRECTION = 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, DCS1800_EPSK_CAL_PCL = 8, 6, 2, DCS1800_EPSK_2CAL_PCL = 15, 0, DCS1800_EPSK_4CAL_PCL = 15,8,6,2, DCS1800_EPSK_PCL = 15,14,13,12,11,10, 9, 8, 7, 6, 5,4,3,2,1,0, DCS1800_EPSK_CHECK_PCL = 15,14,13,12,11,10, 9, 8, 7, 6, 5,4,3,2,1,0, DCS1800_EPSK_MAX_P = 1,3,5,7,9,11,13,15,17,19,21,23,25,26.5,26.5,26.5, DCS1800_EPSK_WANTED_P = 0,2,4,6,8,10,12,14,16,18,20,22,23.2,25.5,25.5,25.5, DCS1800_EPSK_MIN_P = -1,1,3,5,7,9,11,13,15,17,19,21,22.5,24,24,24, DCS1800_EPSK_C = 32,32,32,32,32,32,32,32,32,32,32,32,32,32,32,32, DCS1800_EPSK_CORRECTION = 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, DCS1800 EDGE TPC PA GAIN MAX=50,50,50,50,50,50,50,50,50,50,50,50,50,50,50,50, DCS1800 EDGE TPC PA GAIN MIN=0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, PCS1900_CAL_PCL = 13, 8, 1, PCS1900_2CAL_PCL = 15, 0, PCS1900_PCL = 15,14,13,12,11,10, 9, 8, 7, 6, 5,4,3,2,1,0, PCS1900_CHECK_PCL = 15,14,13,12,11,10, 9, 8, 7, 6, 5,4,3,2,1,0, PCS1900_MAX_P = 2,3.3,5,7,9,11,13,15,17,19,21,23,25,27,29,31, PCS1900_WANTED_P = 0.6,2.4,4,6,8,10,12,14,16,18,20,22,24,26,28,29.5, PCS1900_MIN_P = -0.5,1.3,3.1,5,7,9,11,13,15,17,19,21,23,25,27,28.8, PCS1900_C = 2,2,2,2,3,3,3,3,3,3,3,3,3,3,3,3, PCS1900_CORRECTION = 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, PCS1900_EPSK_CAL_PCL = 8, 6, 2, PCS1900_EPSK_2CAL_PCL = 15, 0, PCS1900_EPSK_4CAL_PCL = 15,8,6,2, PCS1900_EPSK_PCL = 15,14,13,12,11,10, 9, 8, 7, 6, 5,4,3,2,1,0, PCS1900_EPSK_CHECK_PCL = 15,14,13,12,11,10, 9, 8, 7, 6, 5,4,3,2,1,0, PCS1900_EPSK_MAX_P = 1,3,5,7,9,11,13,15,17,19,21,23,25,26.5,26.5,26.5, PCS1900_EPSK_WANTED_P = 0,2,4,6,8,10,12,14,16,18,20,22,23.2,25.5,25.5,25.5, PCS1900_EPSK_MIN_P = -1,1,3,5,7,9,11,13,15,17,19,21,22.5,24,24,24, PCS1900_EPSK_C = 32,32,32,32,32,32,32,32,32,32,32,32,32,32,32,32, PCS1900_EPSK_CORRECTION = 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, PCS1900 EDGE TPC PA GAIN MAX=50,50,50,50,50,50,50,50,50,50,50,50,50,50,50,50, PCS1900 EDGE TPC PA GAIN MIN=0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, ;add in
YD/Jostain GSM850_SUBBAND_FLATNESS_CHECK_PCL=5 GSM900_SUBBAND_FLATNESS_CHECK_PCL=5 DCS1800_SUBBAND_FLATNESS_CHECK_PCL=0 PCS1900_SUBBAND_FLATNESS_CHECK_PCL=0 GSM850_SUBBAND_FLATNESS_RANGE=0.3 GSM900_SUBBAND_FLATNESS_RANEG=0.3 DCS1800_SUBBAND_FLATNESS_RANGE=0.3 PCS1900_SUBBAND_FLATNESS_RANGE=0.3 TXPC_CAL_TEMP=25 ; default 900 TXPC_GMSK_MAX_APC_DAC=950 ; default 30 TXPC_GMSK_MIN_APC_DAC=30 ; default 895 TXPC_EPSK_MAX_APC_DAC=995 ; default 192 TXPC_EPSK_MIN_APC_DAC=192 ; default 10 (unit: dB) TXPC_MAX_SUBBAND_COMP=10.0 ; default -10 (unit: dB) TXPC_MIN_SUBBAND_COMP=-10.0 TSC=5 Recursive Times=50 APC Delta=0.1 MIN_GMSK_GSM850_APC_DAC = 20 MIN_GMSK_GSM900_APC_DAC = 20 MIN_GMSK_DCS1800_APC_DAC = 20 MIN_GMSK_PCS1900_APC_DAC = 20 MAX_GMSK_GSM850_APC_DAC = 790 MAX_GMSK_GSM900_APC_DAC = 790 MAX_GMSK_DCS1800_APC_DAC = 790 MAX_GMSK_PCS1900_APC_DAC = 790 ;MIN_GMSK_GSM850_APC_DAC = 50 ;MIN_GMSK_GSM900_APC_DAC = 50 ;MIN_GMSK_DCS1800_APC_DAC = 50 ;MIN_GMSK_PCS1900_APC_DAC = 50 ;MAX_GMSK_GSM850_APC_DAC = 550 ;MAX_GMSK_GSM900_APC_DAC = 550 ;MAX_GMSK_DCS1800_APC_DAC = 550 ;MAX_GMSK_PCS1900_APC_DAC = 550 ;MIN_EPSK_GSM850_APC_DAC = 200 ;MIN_EPSK_GSM900_APC_DAC = 200 ;MIN_EPSK_DCS1800_APC_DAC = 200 ;MIN_EPSK_PCS1900_APC_DAC = 200 ;MAX_EPSK_GSM850_APC_DAC = 700 ;MAX_EPSK_GSM900_APC_DAC = 700 ;MAX_EPSK_DCS1800_APC_DAC = 700 ;MAX_EPSK_PCS1900_APC_DAC = 700 ;APC check = no; for FHC only FHC_UTS_GMSK_GSM850_MEASURE_SAMPLES = 30 FHC_UTS_GMSK_GSM900_MEASURE_SAMPLES = 30 FHC_UTS_GMSK_DCS1800_MEASURE_SAMPLES = 30 FHC_UTS_GMSK_PCS1900_MEASURE_SAMPLES = 30 ;FHC_UTS_EPSK_GSM850_MEASURE_SAMPLES = 50 ;FHC_UTS_EPSK_GSM900_MEASURE_SAMPLES = 50 ;FHC_UTS_EPSK_DCS1800_MEASURE_SAMPLES = 50 ;FHC_UTS_EPSK_PCS1900_MEASURE_SAMPLES = 50 FHC_UTS_GMSK_MEASURE_COUNT = 1 FHC_UTS_EPSK_MEASURE_COUNT = 1 FHC_UTS_GSM850_GMSK_MATH_MODE = 1 FHC_UTS_GSM900_GMSK_MATH_MODE = 1 FHC_UTS_DCS1800_GMSK_MATH_MODE = 1 FHC_UTS_PCS1900_GMSK_MATH_MODE = 1 ;FHC_UTS_GSM850_EPSK_MATH_MODE = 0 ;FHC_UTS_GSM900_EPSK_MATH_MODE = 0 ;FHC_UTS_DCS1800_EPSK_MATH_MODE = 0 ;FHC_UTS_PCS1900_EPSK_MATH_MODE = 0 ;FHC_UTS_APC_DAC_MODE = 0 FHC_UTS_GMSK_APC_DAC_MODE = 0 ;FHC_UTS_EPSK_APC_DAC_MODE = 0FHC_UTS_GSM850_GMSK_APC_LOG_SPACE_OFFSET=-60.54 ;FHC_UTS_GSM850_EPSK_APC_LOG_SPACE_OFFSET_HIGH=1036.13 ;FHC_UTS_GSM850_EPSK_APC_LOG_SPACE_OFFSET=-376.04 FHC_UTS_GSM900_GMSK_APC_LOG_SPACE_OFFSET=-60.54 ;FHC_UTS_GSM900_EPSK_APC_LOG_SPACE_OFFSET_HIGH=1036.13 ;FHC_UTS_GSM900_EPSK_APC_LOG_SPACE_OFFSET=-376.04 FHC_UTS_DCS1800_GMSK_APC_LOG_SPACE_OFFSET=-74.48 ;FHC_UTS_DCS1800_EPSK_APC_LOG_SPACE_OFFSET_HIGH=-331.86 ;FHC_UTS_DCS1800_EPSK_APC_LOG_SPACE_OFFSET=-429.16 FHC_UTS_PCS1900_GMSK_APC_LOG_SPACE_OFFSET=-72.44 ;FHC_UTS_PCS1900_EPSK_APC_LOG_SPACE_OFFSET_HIGH=469.12 ;FHC_UTS_PCS1900_EPSK_APC_LOG_SPACE_OFFSET=-368.30; for 2G NSFT 2G 终测，校准时一般不选 [NSFT Common] ; GSM450 0x01 ; GSM850 0x02 ; GSM900 0x04 ; DCS ; PCS NSFT_bank = 0x1E TSC = 5 ; BCH ARFCN by Band BCH_ARFCN_GSM850 = 190 BCH_ARFCN_GSM900 = 65 BCH_ARFCN_DCS1800 = 670 BCH_ARFCN_PCS1900 = 660 ; Test TCH ARFCN by BTCH_ARFCN_GSM850 = 128,251,190 TCH_ARFCN_GSM850 =130, ;TCH_ARFCN_GSM900 = 975, 124, 38 TCH_ARFCN_GSM900 = 38, ;TCH_ARFCN_DCS1800 = 512,879,885, TCH_ARFCN_DCS1800 = 879, ;TCH_ARFCN_PCS1900 = 512,661,810, TCH_ARFCN_PCS1900 = 661, ; Muti-measurment count MEASUREMENT_COUNT = 5 ; Used time slot E_TCH_TIMESLOT = 3 [NSFT GMSK TX] BCH_CELL_POWER = -50 TCH_CELL_POWER = -50 ; Test pcl by band by channel TEST_GSM850_CHANNEL_NUM = 3 PCL_IN_GSM850_ARFCN_1 = 5, PCL_IN_GSM850_ARFCN_2 = 15, PCL_IN_GSM850_ARFCN_3 = 19, TEST_GSM900_CHANNEL_NUM = 3 PCL_IN_GSM900_ARFCN_1 = 5, PCL_IN_GSM900_ARFCN_2 = 15, PCL_IN_GSM900_ARFCN_3 = 19, TEST_DCS1800_CHANNEL_NUM = 3 PCL_IN_DCS1800_ARFCN_1 = 2, PCL_IN_DCS1800_ARFCN_2 = 9, PCL_IN_DCS1800_ARFCN_3 = 15, TEST_PCS1900_CHANNEL_NUM = 3 PCL_IN_PCS1900_ARFCN_1 = 2, PCL_IN_PCS1900_ARFCN_2 = 9, PCL_IN_PCS1900_ARFCN_3 = 15, GMSK_TX_TXP_Enabled=1, 0 GMSK_TX_PVT_Enabled=1, 0 GMSK_TX_PFER_Enabled=1, 0 GMSK_TX_ORFS_Enabled=1, 0 [NSFT BER] BCH_CELL_POWER = -50 TCH_CELL_POWER = -100 E_TCH_MS_TX_LEVEL = 5 E_NUM_OF_BITS_TO_TEST = 10000 SBER = 1 LBER = 1 [NSFT EPSK TX] ; Coding scheme in EPSK MCS5 = 5, MCS6 = 6, MCS7 = 7 MCS = 5 BCH_CELL_POWER = -50 TCH_CELL_POWER = -50 ; Test PCL by band by channel TEST_GSM850_CHANNEL_NUM = 3 PCL_IN_GSM850_ARFCN_1 = 5, PCL_IN_GSM850_ARFCN_2 = 15, PCL_IN_GSM850_ARFCN_3 = 19, TEST_GSM900_CHANNEL_NUM = 3 PCL_IN_GSM900_ARFCN_1 = 8, PCL_IN_GSM900_ARFCN_2 = 15, PCL_IN_GSM900_ARFCN_3 = 19, TEST_DCS1800_CHANNEL_NUM = 3 PCL_IN_DCS1800_ARFCN_1 = 2, PCL_IN_DCS1800_ARFCN_2 = 9, PCL_IN_DCS1800_ARFCN_3 = 15, TEST_PCS1900_CHANNEL_NUM = 3 PCL_IN_PCS1900_ARFCN_1 = 2, PCL_IN_PCS1900_ARFCN_2 = 9, PCL_IN_PCS1900_ARFCN_3 = 15, EPSK_TX_TXP_Enabled=1, 0 EPSK_TX_PVT_Enabled=1, 0 EPSK_TX_EMA_Enabled=1, 0 EPSK_TX_ORFS_Enabled=1, 0[NSFT CHECK] ; GMSK Power Min/Max Critira GSM850_MAX_P = 6.0, 8.0,10.0,12.0,14.0,16.0,18.0,20.0,22.0,24.0,26.0,28.0,30.0,31.5,33.2, GSM850_MIN_P = 4.0, 6.0, 8.0,10.0,12.0,14.0,16.0,18.0,20.0,22.0,24.0,26.0,28.0,29.5,31.2, GSM900_MAX_P = 6.0, 8.0,10.0,12.0,14.0,16.0,18.0,20.0,22.0,24.0,26.0,28.0,30.0,31.5,33.2, GSM900_MIN_P = 4.0, 6.0, 8.0,10.0,12.0,14.0,16.0,18.0,20.0,22.0,24.0,26.0,28.0,29.5,31.2, DCS1800_MAX_P = 2.0, 3.3, 5.1, 7.0, 9.0,11.0,13.0,15.0,17.0,19.0,21.0,23.0,25.0,27.0,28.5,30.2, DCS1800_MIN_P = 0.0, 1.3, 3.1, 5.0, 7.0,10.0,11.0,13.0,15.0,17.0,19.0,21.0,23.0,25.0,26.5,28.2, PCS1900_MAX_P = 2.0, 3.3, 5.1, 7.0, 9.0,11.0,13.0,15.0,17.0,19.0,21.0,23.0,25.0,27.0,28.5,30.2, PCS1900_MIN_P = 0.0, 1.3, 3.1, 5.0, 7.0,10.0,11.0,13.0,15.0,17.0,19.0,21.0,23.0,25.0,26.5,28.2, ; EPSK Power Min/Max Critria GSM850_EPSK_MAX_P = 6.0, 8.0,10.0,12.0,14.0,16.0,18.0,20.0,22.0,24.0,26.0,27.5,27.5,27.5,27.5, ;5.5, 7.5, 9.5,11.5,13.5,15.5,17.5,19.5,21.5,23.5,25.5,28.5,28.5,28.5,28.5, GSM850_EPSK_MIN_P = 4.0, 6.0, 8.0,10.0,12.0,14.0,16.0,18.0,20.0,22.0,24.0,25.5,25.5,25.5,25.5, ;4.5, 6.5, 8.5,10.5,12.5,14.5,16.5,18.5,20.5,22.5,24.5,26.3,26.3,26.3,26.3, GSM900_EPSK_MAX_P = 6.0, 8.0,10.0,12.0,14.0,16.0,18.0,20.0,22.0,24.0,26.0,27.5,27.5,27.5,27.5, GSM900_EPSK_MIN_P = 4.0, 6.0, 8.0,10.0,12.0,14.0,16.0,18.0,20.0,22.0,24.0,25.5,25.5,25.5,25.5, DCS1800_EPSK_MAX_P = 1.0, 3.0, 5.0, 7.0, 9.0,11.0,13.5,15.0,17.0,19.0,21.0,23.0,25.0,27.0,27.0,27.0, DCS1800_EPSK_MIN_P = -1.0, 1.0, 3.0, 5.0, 7.0, 9.0,11.5,13.0,15.0,17.0,19.0,21.0,23.0,25.0,25.0,25.0, PCS1900_EPSK_MAX_P = 1.0, 3.0, 5.0, 7.0, 9.0,11.0,13.5,15.0,17.0,19.0,21.0,23.0,25.0,27.0,27.0,27.0, PCS1900_EPSK_MIN_P = -1.0, 1.0, 3.0, 5.0, 7.0, 9.0,11.5,13.0,15.0,17.0,19.0,21.0,23.0,25.0,25.0,25.0, ; Frequency and Phase Error Max Critiria for GMSK GSM850_Freq_Error_Limit = 85 GSM850_Phase_Error_Peak_Limit = 20 GSM850_Phase_Error_RMS_Limit = 5 ;-------------------------------GSM900_Freq_Error_Limit = 90 GSM900_Phase_Error_Peak_Limit = 20 GSM900_Phase_Error_RMS_Limit = 5 ;-------------------------------DCS1800_Freq_Error_Limit = 180 DCS1800_Phase_Error_Peak_Limit = 20 DCS1800_Phase_Error_RMS_Limit = 5 ;-------------------------------PCS1900_Freq_Error_Limit = 190 PCS1900_Phase_Error_Peak_Limit = 20 PCS1900_Phase_Error_RMS_Limit = 5 ; Modulation Accuracy Measurement Max Critiria for EPSK GSM850_EPSK_95P_EVM = 15 GSM850_EPSK_95P_MAGERR = 10 GSM850_EPSK_95P_PHERR = 10 GSM850_EPSK_EVM_PK = 30 GSM850_EPSK_EVM_RMS = 9 GSM850_EPSK_MAGERR_PK = 17.7 GSM850_EPSK_MAGERR_RMS = 12.5 GSM850_EPSK_PHERR_PK = 20 GSM850_EPSK_PHERR_RMS = 5 GSM850_EPSK_ORIG_OFFSET = -30.0 ;-------------------------------GSM900_EPSK_95P_EVM = 15 GSM900_EPSK_95P_MAGERR = 10 GSM900_EPSK_95P_PHERR = 10 GSM900_EPSK_EVM_PK = 30 GSM900_EPSK_EVM_RMS = 9 GSM900_EPSK_MAGERR_PK = 17.7 GSM900_EPSK_MAGERR_RMS = 12.5 GSM900_EPSK_PHERR_PK = 20 GSM900_EPSK_PHERR_RMS = 5 GSM900_EPSK_ORIG_OFFSET = -30.0 ;-------------------------------DCS1800_EPSK_95P_EVM = 15 DCS1800_EPSK_95P_MAGERR = 10 DCS1800_EPSK_95P_PHERR = 10 DCS1800_EPSK_EVM_PK = 30 DCS1800_EPSK_EVM_RMS = 9 DCS1800_EPSK_MAGERR_PK = 17.7 DCS1800_EPSK_MAGERR_RMS = 12.5 DCS1800_EPSK_PHERR_PK = 20 DCS1800_EPSK_PHERR_RMS = 5 DCS1800_EPSK_ORIG_OFFSET = -30.0 ;-------------------------------PCS1900_EPSK_95P_EVM = 15 PCS1900_EPSK_95P_MAGERR = 10 PCS1900_EPSK_95P_PHERR = 10 PCS1900_EPSK_EVM_PK = 30 PCS1900_EPSK_EVM_RMS = 9 PCS1900_EPSK_MAGERR_PK = 17.7 PCS1900_EPSK_MAGERR_RMS = 12.5 PCS1900_EPSK_PHERR_PK = 20 PCS1900_EPSK_PHERR_RMS = 5 PCS1900_EPSK_ORIG_OFFSET = -30.0 ; Modulation Spectrum E(-100,100,-200,200,-250,250,-400,400,-600,600,-800,800,-,-,-,-16 00,,1800) ;ORFS_MOD_ENABLE = 1,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, ORFS_MOD_ENABLE = 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, ; Switching Spectrum E(-400,400,-600,600,-,-) ;ORFS_SW_ENABLE = 1,0,0,1,0,0,0,0, ORFS_SW_ENABLE = 1,1,1,1,1,1,1,1, ; GMSK Modulation Spectrum Min/Max Critiria (kHZ) ; (-,-,-,-600,-400,-250,-200,-100,100,200,250,400,600,800,,00) GSM850_ORFS_MOD = 0.5,0.5,-30.0,-30.0,-33.0,-33.0,-55.0,-55.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60. 0,-60.0,-60.0,-60.0,-60.0, GSM900_ORFS_MOD = 0.5,0.5,-30.0,-30.0,-33.0,-33.0,-55.0,-55.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60. 0,-60.0,-60.0,-60.0,-60.0, DCS1800_ORFS_MOD = 0.5,0.5,-30.0,-30.0,-33.0,-33.0,-50.0,-50.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60. 0,-60.0,-60.0,-60.0,-60.0, PCS1900_ORFS_MOD = 0.5,0.5,-30.0,-30.0,-33.0,-33.0,-55.0,-55.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60. 0,-60.0,-60.0,-60.0,-60.0, ; GMSK Switching Spectrum Min/Max Critiria (kHZ) ; (-,-600,-400,400,600,) GSM850_ORFS_SW = -19.0,-19.0,-21.0,-21.0,-21.0,-21.0,-24.0,-24.0, GSM900_ORFS_SW = -19.0,-19.0,-21.0,-21.0,-21.0,-21.0,-24.0,-24.0, DCS1800_ORFS_SW = -15.0,-15.0,-21.0,-21.0,-21.0,-21.0,-24.0,-24.0, PCS1900_ORFS_SW = -19.0,-19.0,-21.0,-21.0,-21.0,-21.0,-24.0,-24.0, ; EPSK Modulation Spectrum Min/Max Critria (kHZ) ; (-,-,-,-600,-400,-250,-200,-100,100,200,250,400,600,800,,00) EPSK_GSM850_ORFS_MOD = 0.5,0.5,-30.0,-30.0,-33.0,-33.0,-55.0,-55.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60. 0,-60.0,-60.0,-60.0,-60.0, EPSK_GSM900_ORFS_MOD = 0.5,0.5,-30.0,-30.0,-33.0,-33.0,-55.0,-55.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60. 0,-60.0,-60.0,-60.0,-60.0, EPSK_DCS1800_ORFS_MOD = 0.5,0.5,-30.0,-30.0,-33.0,-33.0,-55.0,-55.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60. 0,-60.0,-60.0,-60.0,-60.0, EPSK_PCS1900_ORFS_MOD = 0.5,0.5,-30.0,-30.0,-33.0,-33.0,-55.0,-55.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60. 0,-60.0,-60.0,-60.0,-60.0, ; EPSK Switching Spectrum Min/Max Critiria (kHZ) ; (-,-600,-400,400,600,) EPSK_GSM850_ORFS_SW = -19.0,-19.0,-21.0,-21.0,-21.0,-21.0,-24.0,-24.0, EPSK_GSM900_ORFS_SW = -19.0,-19.0,-21.0,-21.0,-21.0,-21.0,-24.0,-24.0, EPSK_DCS1800_ORFS_SW = -19.0,-19.0,-21.0,-21.0,-21.0,-21.0,-24.0,-24.0, EPSK_PCS1900_ORFS_SW = -19.0,-19.0,-21.0,-21.0,-21.0,-21.0,-24.0,-24.0, ;BER Ratio Max Critiria(%) BER_RATIO_MAX = 2.4[SP6010 Initialization] TD 校准文件 GPIB Address = GPIB0::14::INSTR TD 校准时校准设备 SP6010 和数据采集卡之间的连接地址 Uplink cable loss = 0.5 Downlink cable loss = 0.5 校准线损值[TDSCDMA Common] TDSCDMA_BAND_CONFIG = 0x21 频段选择，一般为 21，即 A 和 F 频段 ; BandA 0x01 ; BandB 0x02 ; BandC 0x04 ; BandD 0x08 ; BandE 0x10 ; BandF 0x20[TDSCDMA Temperature ADC] TDSCDMA_TADC_CURRENT_TEMPERATURE= 25 ; user define MAX RANGE MAX_TEMP_ADC = 4000 ; user define MIN RANGE MIN_TEMP_ADC = 500[TDSCDMA AFC table];?ぶ??ㄢ TDSCDMA_AFC_EXPECTED_POWER=20 TDSCDMA_AFC_APCDAC=5 TDSCDMA_AFC_P_DL = -70 TDSCDMA_AFC_UARFCN = 10087 TDSCDMA_AFC_MEASURE_COUNT = 1 TDSCDMA_AFC_DAC1 = 4400 TDSCDMA_AFC_DAC2 = 4600 TDSCDMA_MAX_INIT_AFC_DAC = 7000 TDSCDMA_MIN_INIT_AFC_DAC = 2000 TDSCDMA_MAX_AFC_SLOPE = 9.0 TDSCDMA_MIN_AFC_SLOPE = 6.0 TDSCDMA_CAP_ID1 = 130 TDSCDMA_CAP_ID2 = 170 TDSCDMA_AFC_DAC_FOR_CAP_ID_CAL = 4500 [TDSCDMA RSSI table] TDSCDMA_RSSI_CAL_MODE_NUM = 2 ; 1: LNA High, ; 2: LNA High, M 3: LNA High, Middle, Low TDSCDMA_RSSI_P_DL_HIGH_MODE = -80 TDSCDMA_RSSI_P_DL_MID_MODE = -65 TDSCDMA_RSSI_P_DL_LOW_MODE = -20 TDSCDMA_RSSI_RF_GAIN_INDEX_HIGH_MODE = 70 TDSCDMA_RSSI_RF_GAIN_INDEX_MID_MODE = 55 TDSCDMA_RSSI_RF_GAIN_INDEX_LOW_MODE = 10MHz_MAX_RX_LOSS = 15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15. 0,15.000,15.000, MHz_MAX_RX_LOSS = 15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15. 0,15.000,15.000, MHz_MAX_RX_LOSS = 15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15. 0,15.000,15.000, MHz_MAX_RX_LOSS = 15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15. 0,15.000,15.000, MHz_MAX_RX_LOSS = 15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15. 0,15.000,15.000,MHz_MIN_RX_LOSS = -10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.00 00,-10.000,-10.000,-10.0000, MHz_MIN_RX_LOSS = -10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.00 00,-10.000,-10.000,-10.-1990MHz_MIN_RX_LOSS = -10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.00 00,-10.000,-10.000,-10.-2620MHz_MIN_RX_LOSS = -10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.00 00,-10.000,-10.000,-10.-2400MHz_MIN_RX_LOSS = -10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.00 00,-10.000,-10.000,-10.0000, [TDSCDMA TPC table] 功率控制选择，默认为 OFFSET=0 时为 24db，修改成 OFFSET=1 时为 25db，修改成 OFFSET=-1 时 为 23db MHz_TPC_WANTED_P_OFFSET=0 MHz_TPC_WANTED_P_OFFSET=0 MHz_TPC_WANTED_P_OFFSET=0 MHz_TPC_WANTED_P_OFFSET=0 MHz_TPC_WANTED_P_OFFSET=0 TDSCDMA_TPC_P_DL = -60 MHz_MAX_POWER_H = 24.0,24.0,24.0,24.0, 校准失败提示 PA 功控超标，提高该值 MHz_MAX_POWER_M = 24.0,24.0,24.0,24.0, 实测值，一般在此处修改功率 MHz_MAX_POWER_L = 24.0,24.0,24.0,24.0, MHz_MIN_POWER_H = 0.0,0.0,0.0,0.0, MHz_MIN_POWER_M = 0.0,0.0,0.0,0.0, MHz_MIN_POWER_L = 0.0,0.0,0.0,0.0,MHz_MAX_POWER_H = 24.0,24.0,24.0,24.0, 校准失败提示 PA 功控超标，提高该值 MHz_MAX_POWER_M = 24.0,24.0,24.0,24.0, MHz_MAX_POWER_L = 24.0,24.0,24.0,24.0, MHz_MIN_POWER_H = 0.0,0.0,0.0,0.0, MHz_MIN_POWER_M = 0.0,0.0,0.0,0.0, MHz_MIN_POWER_L = 0.0,0.0,0.0,0.0, MHz_MAX_POWER_H = 24.0,24.0,24.0,24.0, MHz_MAX_POWER_M = 24.0,24.0,24.0,24.0, MHz_MAX_POWER_L = 24.0,24.0,24.0,24.0, MHz_MIN_POWER_H = 5.0,5.0,5.0,5.0, MHz_MIN_POWER_M = 5.0,5.0,5.0,5.0, MHz_MIN_POWER_L = 5.0,5.0,5.0,5.0,MHz_MAX_POWER_H = 24.0,24.0,24.0,24.0, MHz_MAX_POWER_M = 24.0,24.0,24.0,24.0, MHz_MAX_POWER_M = 24.0,24.0,24.0,24.0, MHz_MIN_POWER_H = 5.0,5.0,5.0,5.0, MHz_MIN_POWER_M = 5.0,5.0,5.0,5.0, MHz_MIN_POWER_L = 5.0,5.0,5.0,5.0, MHz_MAX_POWER_H = 24.0,24.0,24.0,24.0, MHz_MAX_POWER_M = 24.0,24.0,24.0,24.0, MHz_MAX_POWER_L = 24.0,24.0,24.0,24.0, MHz_MIN_POWER_H = 5.0,5.0,5.0,5.0, MHz_MIN_POWER_M = -5,-5,-5,-5, MHz_MIN_POWER_L = -5,-5,-5,-5,MHz_MAX_FREQ_COMP 3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.,3.000,3.000, MHz_MAX_FREQ_COMP 3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.,3.000,3.000, MHz_MAX_FREQ_COMP 3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.,3.000,3.000, MHz_MAX_FREQ_COMP 3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.,3.000,3.000, MHz_MAX_FREQ_COMP 3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.,3.000,3.000,= = = = =MHz_MIN_FREQ_COMP = -3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.,-3.00 0,-3.-2025MHz_MIN_FREQ_COMP = -3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.,-3.00 0,-3.-1990MHz_MIN_FREQ_COMP = -3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.,-3.00 0,-3.-2620MHz_MIN_FREQ_COMP = -3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.,-3.00 0,-3.-2400MHz_MIN_FREQ_COMP = -3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.,-3.00 0,-3.0000,[TDSCDMA NSFT Common Settings] TD 终测，有时不过可对应修改 ; BER from tester=Y // get BER BER from tester=N // get single-ended BER only BER from tester =Y RSCP Test =N[TDSCDMA NSFT Test Case_1] Channel = 9500 A 段终测信道 Cable Loss (dB) = 0.5 Max Power Average High (dBm) = 25.0 Max Power Average Low (dBm) = 21.0 Min Power Average High (dBm) = -49 功率 IQ OriginOffset (dB) = -25.0 ACLR 1.6M (dB) = -33.0 ACLR 3.2M (dB) = -43.0 BER Level (dBm) = -108 BER Limit (%) = 0.1 EVM RMS Max= 17.5 Frequency Error Peak (Hz) = 200 OBW MAX = 1.6 ON/OFF Power Area1(dBm) = -65 ON/OFF Power Area2(dBm) = -50 ON/OFF Power Area3(dBm) = -65 ILPC REL1POW (dB)= 0.5 RSCP Test1 (dBm)= -23 RSCP Test2 (dBm)= -65 RSCP Test3 (dBm)= -85 RSCP Accuracy (dB)= 2[TDSCDMA NSFT Test Case_2] Channel = 10087 F 频段终测信道 Cable Loss (dB) = 0.5 Max Power Average High (dBm) = 25.0 Max Power Average Low (dBm) = 21.0 Min Power Average High (dBm) = -49 IQ OriginOffset (dB) = -25.0 ACLR 1.6M (dB) = -33.0 ACLR 3.2M (dB) = -43.0 BER Level (dBm) = -108 BER Limit (%) = 0.1 EVM RMS Max= 17.5 Frequency Error Peak (Hz) = 200 OBW MAX = 1.6 ON/OFF Power Area1(dBm) = -65 ON/OFF Power Area2(dBm) = -50 ON/OFF Power Area3(dBm) = -65 ILPC REL1POW (dB)= 0.5 RSCP Test1 (dBm)= -23 RSCP Test2 (dBm)= -65 RSCP Test3 (dBm)= -85 RSCP Accuracy (dB)= 2[TDSCDMA NSFT Test Case_3] ;Channel = 11750 ;Cable Loss (dB) = -2.0 ;Max Power Average High (dBm) = 25.0 ;Max Power Average Low (dBm) = 21.0 ;Min Power Average High (dBm) = -49 ;IQ OriginOffset (dB) = -25.0 ;ACLR 1.6M (dB) = -33.0 ;ACLR 3.2M (dB) = -43.0 ;BER Level (dBm) = -108 ;BER Limit (%) = 0.1 ;EVM RMS Max= 17.5 ;Frequency Error Peak (Hz) = 200 ;OBW MAX = 1.6 ;ON/OFF Power Area1(dBm) = -65 ;ON/OFF Power Area2(dBm) = -50 ;ON/OFF Power Area3(dBm) = -65 ;ILPC REL1POW (dB)= 0.5 ;RSCP Test1 (dBm)= -35 ;RSCP Test2 (dBm)= -65 ;RSCP Test3 (dBm)= -85 ;RSCP Accuracy (dB)= 2
赞助商链接
以下均以下跌买入为例, 来说明这两部分,下跌时出现的 TD 结构,称之为 TD 买入结构。 1. TD 买入结构是这样形成的: (1)首先,要出现熊市价格反转,或称之为...TD提升机说明书_信息与通信_工程科技_专业资料
暂无评价|0人阅读|0次下载|举报文档TD提升机说明书_信息与通信_工程科技_专业资料。目录 1.用途及特点---2 2...21 7 TD 中各主题的说明信息 ... 22 7 TD 管理流程 ... 24 7.1 时间安排 ......TD.EXE简要使用说明_工学_高等教育_教育专区。td。exe使用简要说明TD.EXE 简要使用说明 TD. EXE(简称 TD)是一个具有窗口界面的程序调试器。利用 TD,用户能够调...关于MT6735方案CFG和ININ配置说明_计算机硬件及网络_...TDSCDMA MHz cable loss = 10.3 TD...PCS 以上为更改 2G 测试频段选项 [RX path...TD200 人机界面终端操作说明 1.终端面板各键位置及各键的功能下图是 TD200 人机界面操作终端面板: 面板各键的功能: ENTER 键:选择菜单,确认数据编辑 ESC 键:...实验内容说明采用环形组网方式时,需要 3 套 SDH ...tjtd39 tjtd40 tjtd39 tjtd40 2、做本实验之...:cfg- :cfg-get- 附该网元配置...2G/TD/LTE 分区需要不同颜色标示出来, 并且需文字说明各个小区的覆盖范围; 2G/TD/LTE 小区覆盖区域必须为同一个 区域,中间不能有穿插,特殊情况比如 TD 的 2...文档中的 UBX Protocol 下的 CFG 项(UBX-CFG)的...Terror :时间误差; tdop :无效时间,参考协议文档 ...10 图 1-13 默认配置 1.4 模块天线说明 LEA-5T ...2G加3G邻区说明_计算机软件及应用_IT/计算机_专业资料。BSC级指令: RLDEI:CELL=TB1SDX1,EXT,UTRAN; 在BSC下增加TDCELL(TB1SDX1)为外部3G小区 RLDEC:CELL=...
All rights reserved Powered by
www.tceic.com
copyright ©right 。文档资料库内容来自网络，如有侵犯请联系客服。}
两大类热门资源免费畅读
续费一年阅读会员，立省24元！
手机射频测试
&&手机射频测试
登录百度文库，专享文档复制特权，财富值每天免费拿！
你可能喜欢当前位置： >>
2G+TD的cfg说明
[META version] META version= ver 6.1.0 [8960 Initialization] 8960 GPIB Address =GPIB0::15::INSTR Time Out =5000 GSM400 cable loss = -0.8 GSM850 cable loss = -1.5 GSM900 cable loss = -1.5 DCS1800 cable loss = -2.2 PCS1900 cable loss = -2.2 TDSCDMA MHz cable loss = -2.0 TDSCDMA MHz cable loss = -2.0 TDSCDMA MHz cable loss = -1.0 TDSCDMA MHz cable loss = -1.0 TDSCDMA MHz cable loss = -2.0 WCDMA BAND1 input cable loss = -3 WCDMA BAND1 output cable loss = -3 WCDMA BAND2 input cable loss = -3.4 WCDMA BAND2 output cable loss = -3.4 WCDMA BAND4 input cable loss = -3.4 WCDMA BAND4 output cable loss = -3.4 WCDMA BAND5 input cable loss = -3.4 WCDMA BAND5 output cable loss = -3.4 WCDMA BAND8 input cable loss = -3.4 WCDMA BAND8 output cable loss = -3.4 ;WCDMA BAND1 input cable loss = -2.3 ;WCDMA BAND1 output cable loss = -2.3 ;WCDMA BAND2 input cable loss = -2.2 ;WCDMA BAND2 output cable loss = -2.2 ;WCDMA BAND4 input cable loss = -2.2 ;WCDMA BAND4 output cable loss = -2.2 ;WCDMA BAND5 input cable loss = -1.5 ;WCDMA BAND5 output cable loss = -1.5 ;WCDMA BAND8 input cable loss = -1.5 ;WCDMA BAND8 output cable loss = -1.5 [CMU200 Initialization] CMU200 GPIB Address =GPIB0::20::INSTR Time Out =5000 GSM400 input cable loss = 0.7 GSM850 input cable loss = 6.2 GSM900 input cable loss = 6.2 DCS1800 input cable loss = 6.3CMU200 和电脑数据采集卡之间的连接地址 PCS1900 input cable loss = 6.3 2G 输入校准线损值 GSM400 output cable loss = 0.7 GSM850 output cable loss = 6.2 GSM900 output cable loss = 6.2 DCS1800 output cable loss = 6.3 PCS1900 output cable loss = 6.3 2G 输出校准线损值 WCDMA BAND1 input cable loss = 0.5 WCDMA BAND1 output cable loss = 0.5 WCDMA BAND2 input cable loss = 0.5 WCDMA BAND2 output cable loss = 0.5 WCDMA BAND4 input cable loss = 0.5 WCDMA BAND4 output cable loss = 0.5 WCDMA BAND5 input cable loss = 0.2 WCDMA BAND5 output cable loss = 0.2 WCDMA BAND8 input cable loss = 0.2 WCDMA BAND8 output cable loss = 0.2 WCDMA BAND11 input cable loss = 0.8 WCDMA BAND11 output cable loss = 0.8[Frequency Bank] 2G 校准频段选择，一般入库 4 频段选择 1E（其他选择为 0C） ，每行加分 号则无效，即不会进行校准 bank = 0x0C ; GSM450 0x01 ; GSM850 0x02 ; GSM900 0x04 ; DCS ; PCS [C0 for each Bank] arfcn_C0_GSM = 65 arfcn_C0_DCS = 700 arfcn_C0_PCS = 660 arfcn_C0_GSM850 = 190[Downlink power] ; For LNA high mode P_DL = -60 ; For LNA middle mode CELL_POWER_2G_LNA_MIDDLE = -45 ; For low middle mode CELL_POWER_2G_LNA_LOW = -30 [W coefficient calibration] ; W_NEGATIVE_IF_CALIBRATION_BAND=GSM, GSM850, DCS, PCS W_NEGATIVE_IF_CALIBRATION_BAND=GSM W_RETRY_COUNT=23 W_CALIBRATION_MODE=16[AFC Calibration] ;AFC_BAND: GSM, DCS, PCS, GSM850 AFC_BAND = GSM AFC_ARFCN = 65 N_AFC = 20 EXTRA_FB = 5 DAC1=4000 DAC2=5000 CRYSTAL_DAC1=4200 CRYSTAL_DAC2=4800 [AFC table] MAX_INIT_AFC_DAC = 6000 MIN_INIT_AFC_DAC = 3000 MAX_AFC_SLOPE = 10.0 MIN_AFC_SLOPE =3.0 [Crystal AFC Calibration] ;CRYSTAL_AFC_BAND: GSM, DCS, PCS, GSM850 CRYSTAL_AFC_BAND = GSM CRYSTAL_AFC_ARFCN = 65 CRYSTAL_AFC_GSM850_PCL = 14 CRYSTAL_AFC_GSM900_PCL = 14 CRYSTAL_AFC_DCS1800_PCL = 7 CRYSTAL_AFC_PCS1900_PCL = 7 CRYSTAL_AFC_CAL_DAC = 4500 CRYSTAL_AFC_CHECK_DAC1 = 0 CRYSTAL_AFC_CHECK_DAC2 = 8191 CRYSTAL_AFC_MIN_FREQ_ERR_PPM = -10.0 CRYSTAL_AFC_MAX_FREQ_ERR_PPM = 10.0 CRYSTAL_AFC_MAX_AFC_TRACK_INIT_FREQ_ERR = 20 CRYSTAL_AFC_FREQ_ERR_MEASUSE_COUNT = 10 CRYSTAL_AFC_TRX_OFFSET_RECURSIVE_TIMES = 20 MAX_CRYSTAL_CAL_CAP_ID = 255 MIN_CRYSTAL_CAL_CAP_ID = 0 CRYSTAL_AFC_MAX_CAP_ID = 255 CRYSTAL_AFC_MIN_CAP_ID = 0[LPM Calibration] DCXO_LPM_CLOAD_FREQ_MIN=20000 DCXO_LPM_CLOAD_FREQ_MAX=200000 ;wpO w1309 P? META tool ?Τ support 32k-less ?闽[RX measurement samples] N_PM = 5 M_PM = 4 [RX path loss table] GSM850_MAX_RX_LOSS = 15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.0000, GSM850_MIN_RX_LOSS = -15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.00 00, GSM900_MAX_RX_LOSS = 15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.0000, GSM900_MIN_RX_LOSS = -15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.00 00, DCS1800_MAX_RX_LOSS = 15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.0000, DCS1800_MIN_RX_LOSS = -15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.00 00, PCS1900_MAX_RX_LOSS = 20.000,20.000,20.000,20.000,20.000,20.000,20.000,20.000,20.000,20.000,20.000,20.0000, PCS1900_MIN_RX_LOSS = -20.000,-20.000,-20.000,-20.000,-20.000,-20.000,-20.000,-20.000,-20.000,-20.000,-20.000,-20.00 00, GSM850_MAX_RX_LOSS_MIDDLE = 15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.0000, GSM850_MIN_RX_LOSS_MIDDLE = -15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.00 00, GSM900_MAX_RX_LOSS_MIDDLE = 15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.0000, GSM900_MIN_RX_LOSS_MIDDLE = -15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.00 00, DCS1800_MAX_RX_LOSS_MIDDLE = 15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.0000, DCS1800_MIN_RX_LOSS_MIDDLE = -15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.00 00, PCS1900_MAX_RX_LOSS_MIDDLE = 20.000,20.000,20.000,20.000,20.000,20.000,20.000,20.000,20.000,20.000,20.000,20.0000, PCS1900_MIN_RX_LOSS_MIDDLE = -20.000,-20.000,-20.000,-20.000,-20.000,-20.000,-20.000,-20.000,-20.000,-20.000,-20.000,-20.00 00, GSM850_MAX_RX_LOSS_LOW = 15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.0000, GSM850_MIN_RX_LOSS_LOW = -15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.00 00, GSM900_MAX_RX_LOSS_LOW = 15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.0000, GSM900_MIN_RX_LOSS_LOW = -15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.00 00, DCS1800_MAX_RX_LOSS_LOW = 15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.0000, DCS1800_MIN_RX_LOSS_LOW = -15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.000,-15.00 00, PCS1900_MAX_RX_LOSS_LOW = 20.000,20.000,20.000,20.000,20.000,20.000,20.000,20.000,20.000,20.000,20.000,20.0000, PCS1900_MIN_RX_LOSS_LOW = -20.000,-20.000,-20.000,-20.000,-20.000,-20.000,-20.000,-20.000,-20.000,-20.000,-20.000,-20.00 00, [TX IQ table] TX_IQ_MEASUREMENT_COUNT = 20 ;TX_IQ_BAND: GSM, DCS, PCS, GSM850 TX_IQ_BAND = GSM TX_IQ_ARFCN = 65 TX_IQ_PCL = 15 TX_IQ_DC_OFFSET_MAX = -38 TX_IQ_GAIN_IMBALANCE_MAX = -35 ; The following setting is for MT6140B TX_IQ_BAND_HIGH = DCS TX_IQ_ARFCN_HIGH = 700 TX_IQ_PCL_HIGH = 5 TX_IQ_DC_OFFSET_MAX_HIGH = -38 TX_IQ_GAIN_IMBALANCE_MAX_HIGH = -35 [TX PCL table] 功率 GSM850_CAL_PCL = 17, 12, 5, GSM850_2CAL_PCL = 19, 5, GSM850_PCL = 19,18,17,16,15,14,13,12,11,10,9,8,7,6,5, GSM850_CHECK_PCL = 19,18,17,16,15,14,13,12,11,10,9,8,7,6,5, GSM850_MAX_P = 6,8,10,12,14,16,18,20,22,24,26,28,30,32,33, 校准浮动上限 GSM850_WANTED_P = 5,7,9.1,11,13,15,17,19,21,23,25,27,29,31,32.5, 实测值 GSM850_MIN_P = 4,6,8,10,12,14,16,18,20,22,24,26,28,30,31.5 校准浮动下限 GSM850_C = 2,2,2,2,2,3,3,3,3,3,3,3,3,3,3,3, GSM850_CORRECTION = 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, GSM850_EPSK_CAL_PCL = 12, 10, 6, GSM850_EPSK_2CAL_PCL = 19, 5, GSM850_EPSK_4CAL_PCL = 19,14,12,8, GSM850_EPSK_PCL = 19,18,17,16,15,14,13,12,11,10,9,8,7,6,5, GSM850_EPSK_CHECK_PCL = 19,18,17,16,15,14,13,12,11,10,9,8,7,6,5, GSM850_EPSK_MAX_P = 6,8,10,12,14,16,18,20,22,24,26,27.1,27.1,27.1,27.1, GSM850_EPSK_WANTED_P = 5,7,9,11,13,15,17,19,21,23,24.2,26.5,26.5,26.5,26.5, EGPRS 实测 GSM850_EPSK_MIN_P = 4,6,8,10,12,14,16,18,20,22,23,25.1,25.1,25.1,25.1, GSM850_EPSK_C = 32,32,32,32,32,32,32,32,32,32,32,32,32,32,32,32, GSM850_EPSK_CORRECTION = 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, GSM850 EDGE TPC PA GAIN MAX=50,50,50,50,50,50,50,50,50,50,50,50,50,50,50,50, GSM850 EDGE TPC PA GAIN MIN=0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, GSM900_CAL_PCL = 17, 12, 5, GSM900_2CAL_PCL = 19, 5, GSM900_PCL = 19,18,17,16,15,14,13,12,11,10,9,8,7,6,5, GSM900_CHECK_PCL = 19,18,17,16,15,14,13,12,11,10,9,8,7,6,5, GSM900_MAX_P = 6,8,10,12,14,16,18,20,22,24,26,28,30,32,33, GSM900_WANTED_P = 5.1,7,9,11,13,15,17,19,21,23,25,27,29,31,32.5, GSM900_MIN_P = 4,6,8,10,12,14,16,18,20,22,24,26,28,30,32 GSM900_C = 2,2,2,2,2,3,3,3,3,3,3,3,3,3,3,3, GSM900_CORRECTION = 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, GSM900_EPSK_CAL_PCL = 12, 10, 6, GSM900_EPSK_2CAL_PCL = 19, 5, GSM900_EPSK_4CAL_PCL = 19,14,12,8, GSM900_EPSK_PCL = 19,18,17,16,15,14,13,12,11,10,9,8,7,6,5, GSM900_EPSK_CHECK_PCL = 19,18,17,16,15,14,13,12,11,10,9,8,7,6,5, GSM900_EPSK_MAX_P = 6,8,10,12,14,16,18,20,22,24,26,27.1,27.1,27.1,27.1, GSM900_EPSK_WANTED_P = 5,7,9,11,13,15,17,19,21,23,24.2,26.5,26.5,26.5,26.5, GSM900_EPSK_MIN_P = 4,6,8,10,12,14,16,18,20,22,23.5,25,25,25,25, GSM900_EPSK_C = 32,32,32,32,32,32,32,32,32,32,32,32,32,32,32,32, GSM900_EPSK_CORRECTION = 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, GSM900 EDGE TPC PA GAIN MAX=50,50,50,50,50,50,50,50,50,50,50,50,50,50,50,50, GSM900 EDGE TPC PA GAIN MIN=0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, DCS1800_CAL_PCL = 13, 8, 1, DCS1800_2CAL_PCL = 15, 0, DCS1800_PCL = 15,14,13,12,11,10, 9, 8, 7, 6, 5,4,3,2,1,0, DCS1800_CHECK_PCL = 15,14,13,12,11,10, 9, 8, 7, 6, 5,4,3,2,1,0, DCS1800_MAX_P = 2,3.3,5,7,9,11,13,15,17,19,21,23,25,27,29,31, DCS1800_WANTED_P = 0.7,2.3,4.1,6,8,10,12,14,16,18,20,22,24,26,28,29.5, DCS1800_MIN_P = -0.5,1.3,3.1,5,7,9,11,13,15,17,19,21,23,25,27,29, DCS1800_C = 2,2,2,2,3,3,3,3,3,3,3,3,3,3,3,3, DCS1800_CORRECTION = 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, DCS1800_EPSK_CAL_PCL = 8, 6, 2, DCS1800_EPSK_2CAL_PCL = 15, 0, DCS1800_EPSK_4CAL_PCL = 15,8,6,2, DCS1800_EPSK_PCL = 15,14,13,12,11,10, 9, 8, 7, 6, 5,4,3,2,1,0, DCS1800_EPSK_CHECK_PCL = 15,14,13,12,11,10, 9, 8, 7, 6, 5,4,3,2,1,0, DCS1800_EPSK_MAX_P = 1,3,5,7,9,11,13,15,17,19,21,23,25,26.5,26.5,26.5, DCS1800_EPSK_WANTED_P = 0,2,4,6,8,10,12,14,16,18,20,22,23.2,25.5,25.5,25.5, DCS1800_EPSK_MIN_P = -1,1,3,5,7,9,11,13,15,17,19,21,22.5,24,24,24, DCS1800_EPSK_C = 32,32,32,32,32,32,32,32,32,32,32,32,32,32,32,32, DCS1800_EPSK_CORRECTION = 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, DCS1800 EDGE TPC PA GAIN MAX=50,50,50,50,50,50,50,50,50,50,50,50,50,50,50,50, DCS1800 EDGE TPC PA GAIN MIN=0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, PCS1900_CAL_PCL = 13, 8, 1, PCS1900_2CAL_PCL = 15, 0, PCS1900_PCL = 15,14,13,12,11,10, 9, 8, 7, 6, 5,4,3,2,1,0, PCS1900_CHECK_PCL = 15,14,13,12,11,10, 9, 8, 7, 6, 5,4,3,2,1,0, PCS1900_MAX_P = 2,3.3,5,7,9,11,13,15,17,19,21,23,25,27,29,31, PCS1900_WANTED_P = 0.6,2.4,4,6,8,10,12,14,16,18,20,22,24,26,28,29.5, PCS1900_MIN_P = -0.5,1.3,3.1,5,7,9,11,13,15,17,19,21,23,25,27,28.8, PCS1900_C = 2,2,2,2,3,3,3,3,3,3,3,3,3,3,3,3, PCS1900_CORRECTION = 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, PCS1900_EPSK_CAL_PCL = 8, 6, 2, PCS1900_EPSK_2CAL_PCL = 15, 0, PCS1900_EPSK_4CAL_PCL = 15,8,6,2, PCS1900_EPSK_PCL = 15,14,13,12,11,10, 9, 8, 7, 6, 5,4,3,2,1,0, PCS1900_EPSK_CHECK_PCL = 15,14,13,12,11,10, 9, 8, 7, 6, 5,4,3,2,1,0, PCS1900_EPSK_MAX_P = 1,3,5,7,9,11,13,15,17,19,21,23,25,26.5,26.5,26.5, PCS1900_EPSK_WANTED_P = 0,2,4,6,8,10,12,14,16,18,20,22,23.2,25.5,25.5,25.5, PCS1900_EPSK_MIN_P = -1,1,3,5,7,9,11,13,15,17,19,21,22.5,24,24,24, PCS1900_EPSK_C = 32,32,32,32,32,32,32,32,32,32,32,32,32,32,32,32, PCS1900_EPSK_CORRECTION = 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, PCS1900 EDGE TPC PA GAIN MAX=50,50,50,50,50,50,50,50,50,50,50,50,50,50,50,50, PCS1900 EDGE TPC PA GAIN MIN=0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, ;add in
YD/Jostain GSM850_SUBBAND_FLATNESS_CHECK_PCL=5 GSM900_SUBBAND_FLATNESS_CHECK_PCL=5 DCS1800_SUBBAND_FLATNESS_CHECK_PCL=0 PCS1900_SUBBAND_FLATNESS_CHECK_PCL=0 GSM850_SUBBAND_FLATNESS_RANGE=0.3 GSM900_SUBBAND_FLATNESS_RANEG=0.3 DCS1800_SUBBAND_FLATNESS_RANGE=0.3 PCS1900_SUBBAND_FLATNESS_RANGE=0.3 TXPC_CAL_TEMP=25 ; default 900 TXPC_GMSK_MAX_APC_DAC=950 ; default 30 TXPC_GMSK_MIN_APC_DAC=30 ; default 895 TXPC_EPSK_MAX_APC_DAC=995 ; default 192 TXPC_EPSK_MIN_APC_DAC=192 ; default 10 (unit: dB) TXPC_MAX_SUBBAND_COMP=10.0 ; default -10 (unit: dB) TXPC_MIN_SUBBAND_COMP=-10.0 TSC=5 Recursive Times=50 APC Delta=0.1 MIN_GMSK_GSM850_APC_DAC = 20 MIN_GMSK_GSM900_APC_DAC = 20 MIN_GMSK_DCS1800_APC_DAC = 20 MIN_GMSK_PCS1900_APC_DAC = 20 MAX_GMSK_GSM850_APC_DAC = 790 MAX_GMSK_GSM900_APC_DAC = 790 MAX_GMSK_DCS1800_APC_DAC = 790 MAX_GMSK_PCS1900_APC_DAC = 790 ;MIN_GMSK_GSM850_APC_DAC = 50 ;MIN_GMSK_GSM900_APC_DAC = 50 ;MIN_GMSK_DCS1800_APC_DAC = 50 ;MIN_GMSK_PCS1900_APC_DAC = 50 ;MAX_GMSK_GSM850_APC_DAC = 550 ;MAX_GMSK_GSM900_APC_DAC = 550 ;MAX_GMSK_DCS1800_APC_DAC = 550 ;MAX_GMSK_PCS1900_APC_DAC = 550 ;MIN_EPSK_GSM850_APC_DAC = 200 ;MIN_EPSK_GSM900_APC_DAC = 200 ;MIN_EPSK_DCS1800_APC_DAC = 200 ;MIN_EPSK_PCS1900_APC_DAC = 200 ;MAX_EPSK_GSM850_APC_DAC = 700 ;MAX_EPSK_GSM900_APC_DAC = 700 ;MAX_EPSK_DCS1800_APC_DAC = 700 ;MAX_EPSK_PCS1900_APC_DAC = 700 ;APC check = no; for FHC only FHC_UTS_GMSK_GSM850_MEASURE_SAMPLES = 30 FHC_UTS_GMSK_GSM900_MEASURE_SAMPLES = 30 FHC_UTS_GMSK_DCS1800_MEASURE_SAMPLES = 30 FHC_UTS_GMSK_PCS1900_MEASURE_SAMPLES = 30 ;FHC_UTS_EPSK_GSM850_MEASURE_SAMPLES = 50 ;FHC_UTS_EPSK_GSM900_MEASURE_SAMPLES = 50 ;FHC_UTS_EPSK_DCS1800_MEASURE_SAMPLES = 50 ;FHC_UTS_EPSK_PCS1900_MEASURE_SAMPLES = 50 FHC_UTS_GMSK_MEASURE_COUNT = 1 FHC_UTS_EPSK_MEASURE_COUNT = 1 FHC_UTS_GSM850_GMSK_MATH_MODE = 1 FHC_UTS_GSM900_GMSK_MATH_MODE = 1 FHC_UTS_DCS1800_GMSK_MATH_MODE = 1 FHC_UTS_PCS1900_GMSK_MATH_MODE = 1 ;FHC_UTS_GSM850_EPSK_MATH_MODE = 0 ;FHC_UTS_GSM900_EPSK_MATH_MODE = 0 ;FHC_UTS_DCS1800_EPSK_MATH_MODE = 0 ;FHC_UTS_PCS1900_EPSK_MATH_MODE = 0 ;FHC_UTS_APC_DAC_MODE = 0 FHC_UTS_GMSK_APC_DAC_MODE = 0 ;FHC_UTS_EPSK_APC_DAC_MODE = 0FHC_UTS_GSM850_GMSK_APC_LOG_SPACE_OFFSET=-60.54 ;FHC_UTS_GSM850_EPSK_APC_LOG_SPACE_OFFSET_HIGH=1036.13 ;FHC_UTS_GSM850_EPSK_APC_LOG_SPACE_OFFSET=-376.04 FHC_UTS_GSM900_GMSK_APC_LOG_SPACE_OFFSET=-60.54 ;FHC_UTS_GSM900_EPSK_APC_LOG_SPACE_OFFSET_HIGH=1036.13 ;FHC_UTS_GSM900_EPSK_APC_LOG_SPACE_OFFSET=-376.04 FHC_UTS_DCS1800_GMSK_APC_LOG_SPACE_OFFSET=-74.48 ;FHC_UTS_DCS1800_EPSK_APC_LOG_SPACE_OFFSET_HIGH=-331.86 ;FHC_UTS_DCS1800_EPSK_APC_LOG_SPACE_OFFSET=-429.16 FHC_UTS_PCS1900_GMSK_APC_LOG_SPACE_OFFSET=-72.44 ;FHC_UTS_PCS1900_EPSK_APC_LOG_SPACE_OFFSET_HIGH=469.12 ;FHC_UTS_PCS1900_EPSK_APC_LOG_SPACE_OFFSET=-368.30; for 2G NSFT 2G 终测，校准时一般不选 [NSFT Common] ; GSM450 0x01 ; GSM850 0x02 ; GSM900 0x04 ; DCS ; PCS NSFT_bank = 0x1E TSC = 5 ; BCH ARFCN by Band BCH_ARFCN_GSM850 = 190 BCH_ARFCN_GSM900 = 65 BCH_ARFCN_DCS1800 = 670 BCH_ARFCN_PCS1900 = 660 ; Test TCH ARFCN by BTCH_ARFCN_GSM850 = 128,251,190 TCH_ARFCN_GSM850 =130, ;TCH_ARFCN_GSM900 = 975, 124, 38 TCH_ARFCN_GSM900 = 38, ;TCH_ARFCN_DCS1800 = 512,879,885, TCH_ARFCN_DCS1800 = 879, ;TCH_ARFCN_PCS1900 = 512,661,810, TCH_ARFCN_PCS1900 = 661, ; Muti-measurment count MEASUREMENT_COUNT = 5 ; Used time slot E_TCH_TIMESLOT = 3 [NSFT GMSK TX] BCH_CELL_POWER = -50 TCH_CELL_POWER = -50 ; Test pcl by band by channel TEST_GSM850_CHANNEL_NUM = 3 PCL_IN_GSM850_ARFCN_1 = 5, PCL_IN_GSM850_ARFCN_2 = 15, PCL_IN_GSM850_ARFCN_3 = 19, TEST_GSM900_CHANNEL_NUM = 3 PCL_IN_GSM900_ARFCN_1 = 5, PCL_IN_GSM900_ARFCN_2 = 15, PCL_IN_GSM900_ARFCN_3 = 19, TEST_DCS1800_CHANNEL_NUM = 3 PCL_IN_DCS1800_ARFCN_1 = 2, PCL_IN_DCS1800_ARFCN_2 = 9, PCL_IN_DCS1800_ARFCN_3 = 15, TEST_PCS1900_CHANNEL_NUM = 3 PCL_IN_PCS1900_ARFCN_1 = 2, PCL_IN_PCS1900_ARFCN_2 = 9, PCL_IN_PCS1900_ARFCN_3 = 15, GMSK_TX_TXP_Enabled=1, 0 GMSK_TX_PVT_Enabled=1, 0 GMSK_TX_PFER_Enabled=1, 0 GMSK_TX_ORFS_Enabled=1, 0 [NSFT BER] BCH_CELL_POWER = -50 TCH_CELL_POWER = -100 E_TCH_MS_TX_LEVEL = 5 E_NUM_OF_BITS_TO_TEST = 10000 SBER = 1 LBER = 1 [NSFT EPSK TX] ; Coding scheme in EPSK MCS5 = 5, MCS6 = 6, MCS7 = 7 MCS = 5 BCH_CELL_POWER = -50 TCH_CELL_POWER = -50 ; Test PCL by band by channel TEST_GSM850_CHANNEL_NUM = 3 PCL_IN_GSM850_ARFCN_1 = 5, PCL_IN_GSM850_ARFCN_2 = 15, PCL_IN_GSM850_ARFCN_3 = 19, TEST_GSM900_CHANNEL_NUM = 3 PCL_IN_GSM900_ARFCN_1 = 8, PCL_IN_GSM900_ARFCN_2 = 15, PCL_IN_GSM900_ARFCN_3 = 19, TEST_DCS1800_CHANNEL_NUM = 3 PCL_IN_DCS1800_ARFCN_1 = 2, PCL_IN_DCS1800_ARFCN_2 = 9, PCL_IN_DCS1800_ARFCN_3 = 15, TEST_PCS1900_CHANNEL_NUM = 3 PCL_IN_PCS1900_ARFCN_1 = 2, PCL_IN_PCS1900_ARFCN_2 = 9, PCL_IN_PCS1900_ARFCN_3 = 15, EPSK_TX_TXP_Enabled=1, 0 EPSK_TX_PVT_Enabled=1, 0 EPSK_TX_EMA_Enabled=1, 0 EPSK_TX_ORFS_Enabled=1, 0[NSFT CHECK] ; GMSK Power Min/Max Critira GSM850_MAX_P = 6.0, 8.0,10.0,12.0,14.0,16.0,18.0,20.0,22.0,24.0,26.0,28.0,30.0,31.5,33.2, GSM850_MIN_P = 4.0, 6.0, 8.0,10.0,12.0,14.0,16.0,18.0,20.0,22.0,24.0,26.0,28.0,29.5,31.2, GSM900_MAX_P = 6.0, 8.0,10.0,12.0,14.0,16.0,18.0,20.0,22.0,24.0,26.0,28.0,30.0,31.5,33.2, GSM900_MIN_P = 4.0, 6.0, 8.0,10.0,12.0,14.0,16.0,18.0,20.0,22.0,24.0,26.0,28.0,29.5,31.2, DCS1800_MAX_P = 2.0, 3.3, 5.1, 7.0, 9.0,11.0,13.0,15.0,17.0,19.0,21.0,23.0,25.0,27.0,28.5,30.2, DCS1800_MIN_P = 0.0, 1.3, 3.1, 5.0, 7.0,10.0,11.0,13.0,15.0,17.0,19.0,21.0,23.0,25.0,26.5,28.2, PCS1900_MAX_P = 2.0, 3.3, 5.1, 7.0, 9.0,11.0,13.0,15.0,17.0,19.0,21.0,23.0,25.0,27.0,28.5,30.2, PCS1900_MIN_P = 0.0, 1.3, 3.1, 5.0, 7.0,10.0,11.0,13.0,15.0,17.0,19.0,21.0,23.0,25.0,26.5,28.2, ; EPSK Power Min/Max Critria GSM850_EPSK_MAX_P = 6.0, 8.0,10.0,12.0,14.0,16.0,18.0,20.0,22.0,24.0,26.0,27.5,27.5,27.5,27.5, ;5.5, 7.5, 9.5,11.5,13.5,15.5,17.5,19.5,21.5,23.5,25.5,28.5,28.5,28.5,28.5, GSM850_EPSK_MIN_P = 4.0, 6.0, 8.0,10.0,12.0,14.0,16.0,18.0,20.0,22.0,24.0,25.5,25.5,25.5,25.5, ;4.5, 6.5, 8.5,10.5,12.5,14.5,16.5,18.5,20.5,22.5,24.5,26.3,26.3,26.3,26.3, GSM900_EPSK_MAX_P = 6.0, 8.0,10.0,12.0,14.0,16.0,18.0,20.0,22.0,24.0,26.0,27.5,27.5,27.5,27.5, GSM900_EPSK_MIN_P = 4.0, 6.0, 8.0,10.0,12.0,14.0,16.0,18.0,20.0,22.0,24.0,25.5,25.5,25.5,25.5, DCS1800_EPSK_MAX_P = 1.0, 3.0, 5.0, 7.0, 9.0,11.0,13.5,15.0,17.0,19.0,21.0,23.0,25.0,27.0,27.0,27.0, DCS1800_EPSK_MIN_P = -1.0, 1.0, 3.0, 5.0, 7.0, 9.0,11.5,13.0,15.0,17.0,19.0,21.0,23.0,25.0,25.0,25.0, PCS1900_EPSK_MAX_P = 1.0, 3.0, 5.0, 7.0, 9.0,11.0,13.5,15.0,17.0,19.0,21.0,23.0,25.0,27.0,27.0,27.0, PCS1900_EPSK_MIN_P = -1.0, 1.0, 3.0, 5.0, 7.0, 9.0,11.5,13.0,15.0,17.0,19.0,21.0,23.0,25.0,25.0,25.0, ; Frequency and Phase Error Max Critiria for GMSK GSM850_Freq_Error_Limit = 85 GSM850_Phase_Error_Peak_Limit = 20 GSM850_Phase_Error_RMS_Limit = 5 ;-------------------------------GSM900_Freq_Error_Limit = 90 GSM900_Phase_Error_Peak_Limit = 20 GSM900_Phase_Error_RMS_Limit = 5 ;-------------------------------DCS1800_Freq_Error_Limit = 180 DCS1800_Phase_Error_Peak_Limit = 20 DCS1800_Phase_Error_RMS_Limit = 5 ;-------------------------------PCS1900_Freq_Error_Limit = 190 PCS1900_Phase_Error_Peak_Limit = 20 PCS1900_Phase_Error_RMS_Limit = 5 ; Modulation Accuracy Measurement Max Critiria for EPSK GSM850_EPSK_95P_EVM = 15 GSM850_EPSK_95P_MAGERR = 10 GSM850_EPSK_95P_PHERR = 10 GSM850_EPSK_EVM_PK = 30 GSM850_EPSK_EVM_RMS = 9 GSM850_EPSK_MAGERR_PK = 17.7 GSM850_EPSK_MAGERR_RMS = 12.5 GSM850_EPSK_PHERR_PK = 20 GSM850_EPSK_PHERR_RMS = 5 GSM850_EPSK_ORIG_OFFSET = -30.0 ;-------------------------------GSM900_EPSK_95P_EVM = 15 GSM900_EPSK_95P_MAGERR = 10 GSM900_EPSK_95P_PHERR = 10 GSM900_EPSK_EVM_PK = 30 GSM900_EPSK_EVM_RMS = 9 GSM900_EPSK_MAGERR_PK = 17.7 GSM900_EPSK_MAGERR_RMS = 12.5 GSM900_EPSK_PHERR_PK = 20 GSM900_EPSK_PHERR_RMS = 5 GSM900_EPSK_ORIG_OFFSET = -30.0 ;-------------------------------DCS1800_EPSK_95P_EVM = 15 DCS1800_EPSK_95P_MAGERR = 10 DCS1800_EPSK_95P_PHERR = 10 DCS1800_EPSK_EVM_PK = 30 DCS1800_EPSK_EVM_RMS = 9 DCS1800_EPSK_MAGERR_PK = 17.7 DCS1800_EPSK_MAGERR_RMS = 12.5 DCS1800_EPSK_PHERR_PK = 20 DCS1800_EPSK_PHERR_RMS = 5 DCS1800_EPSK_ORIG_OFFSET = -30.0 ;-------------------------------PCS1900_EPSK_95P_EVM = 15 PCS1900_EPSK_95P_MAGERR = 10 PCS1900_EPSK_95P_PHERR = 10 PCS1900_EPSK_EVM_PK = 30 PCS1900_EPSK_EVM_RMS = 9 PCS1900_EPSK_MAGERR_PK = 17.7 PCS1900_EPSK_MAGERR_RMS = 12.5 PCS1900_EPSK_PHERR_PK = 20 PCS1900_EPSK_PHERR_RMS = 5 PCS1900_EPSK_ORIG_OFFSET = -30.0 ; Modulation Spectrum E(-100,100,-200,200,-250,250,-400,400,-600,600,-800,800,-,-,-,-16 00,,1800) ;ORFS_MOD_ENABLE = 1,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, ORFS_MOD_ENABLE = 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, ; Switching Spectrum E(-400,400,-600,600,-,-) ;ORFS_SW_ENABLE = 1,0,0,1,0,0,0,0, ORFS_SW_ENABLE = 1,1,1,1,1,1,1,1, ; GMSK Modulation Spectrum Min/Max Critiria (kHZ) ; (-,-,-,-600,-400,-250,-200,-100,100,200,250,400,600,800,,00) GSM850_ORFS_MOD = 0.5,0.5,-30.0,-30.0,-33.0,-33.0,-55.0,-55.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60. 0,-60.0,-60.0,-60.0,-60.0, GSM900_ORFS_MOD = 0.5,0.5,-30.0,-30.0,-33.0,-33.0,-55.0,-55.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60. 0,-60.0,-60.0,-60.0,-60.0, DCS1800_ORFS_MOD = 0.5,0.5,-30.0,-30.0,-33.0,-33.0,-50.0,-50.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60. 0,-60.0,-60.0,-60.0,-60.0, PCS1900_ORFS_MOD = 0.5,0.5,-30.0,-30.0,-33.0,-33.0,-55.0,-55.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60. 0,-60.0,-60.0,-60.0,-60.0, ; GMSK Switching Spectrum Min/Max Critiria (kHZ) ; (-,-600,-400,400,600,) GSM850_ORFS_SW = -19.0,-19.0,-21.0,-21.0,-21.0,-21.0,-24.0,-24.0, GSM900_ORFS_SW = -19.0,-19.0,-21.0,-21.0,-21.0,-21.0,-24.0,-24.0, DCS1800_ORFS_SW = -15.0,-15.0,-21.0,-21.0,-21.0,-21.0,-24.0,-24.0, PCS1900_ORFS_SW = -19.0,-19.0,-21.0,-21.0,-21.0,-21.0,-24.0,-24.0, ; EPSK Modulation Spectrum Min/Max Critria (kHZ) ; (-,-,-,-600,-400,-250,-200,-100,100,200,250,400,600,800,,00) EPSK_GSM850_ORFS_MOD = 0.5,0.5,-30.0,-30.0,-33.0,-33.0,-55.0,-55.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60. 0,-60.0,-60.0,-60.0,-60.0, EPSK_GSM900_ORFS_MOD = 0.5,0.5,-30.0,-30.0,-33.0,-33.0,-55.0,-55.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60. 0,-60.0,-60.0,-60.0,-60.0, EPSK_DCS1800_ORFS_MOD = 0.5,0.5,-30.0,-30.0,-33.0,-33.0,-55.0,-55.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60. 0,-60.0,-60.0,-60.0,-60.0, EPSK_PCS1900_ORFS_MOD = 0.5,0.5,-30.0,-30.0,-33.0,-33.0,-55.0,-55.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60.0,-60. 0,-60.0,-60.0,-60.0,-60.0, ; EPSK Switching Spectrum Min/Max Critiria (kHZ) ; (-,-600,-400,400,600,) EPSK_GSM850_ORFS_SW = -19.0,-19.0,-21.0,-21.0,-21.0,-21.0,-24.0,-24.0, EPSK_GSM900_ORFS_SW = -19.0,-19.0,-21.0,-21.0,-21.0,-21.0,-24.0,-24.0, EPSK_DCS1800_ORFS_SW = -19.0,-19.0,-21.0,-21.0,-21.0,-21.0,-24.0,-24.0, EPSK_PCS1900_ORFS_SW = -19.0,-19.0,-21.0,-21.0,-21.0,-21.0,-24.0,-24.0, ;BER Ratio Max Critiria(%) BER_RATIO_MAX = 2.4[SP6010 Initialization] TD 校准文件 GPIB Address = GPIB0::14::INSTR TD 校准时校准设备 SP6010 和数据采集卡之间的连接地址 Uplink cable loss = 0.5 Downlink cable loss = 0.5 校准线损值[TDSCDMA Common] TDSCDMA_BAND_CONFIG = 0x21 频段选择，一般为 21，即 A 和 F 频段 ; BandA 0x01 ; BandB 0x02 ; BandC 0x04 ; BandD 0x08 ; BandE 0x10 ; BandF 0x20[TDSCDMA Temperature ADC] TDSCDMA_TADC_CURRENT_TEMPERATURE= 25 ; user define MAX RANGE MAX_TEMP_ADC = 4000 ; user define MIN RANGE MIN_TEMP_ADC = 500[TDSCDMA AFC table];?ぶ??ㄢ TDSCDMA_AFC_EXPECTED_POWER=20 TDSCDMA_AFC_APCDAC=5 TDSCDMA_AFC_P_DL = -70 TDSCDMA_AFC_UARFCN = 10087 TDSCDMA_AFC_MEASURE_COUNT = 1 TDSCDMA_AFC_DAC1 = 4400 TDSCDMA_AFC_DAC2 = 4600 TDSCDMA_MAX_INIT_AFC_DAC = 7000 TDSCDMA_MIN_INIT_AFC_DAC = 2000 TDSCDMA_MAX_AFC_SLOPE = 9.0 TDSCDMA_MIN_AFC_SLOPE = 6.0 TDSCDMA_CAP_ID1 = 130 TDSCDMA_CAP_ID2 = 170 TDSCDMA_AFC_DAC_FOR_CAP_ID_CAL = 4500 [TDSCDMA RSSI table] TDSCDMA_RSSI_CAL_MODE_NUM = 2 ; 1: LNA High, ; 2: LNA High, M 3: LNA High, Middle, Low TDSCDMA_RSSI_P_DL_HIGH_MODE = -80 TDSCDMA_RSSI_P_DL_MID_MODE = -65 TDSCDMA_RSSI_P_DL_LOW_MODE = -20 TDSCDMA_RSSI_RF_GAIN_INDEX_HIGH_MODE = 70 TDSCDMA_RSSI_RF_GAIN_INDEX_MID_MODE = 55 TDSCDMA_RSSI_RF_GAIN_INDEX_LOW_MODE = 10MHz_MAX_RX_LOSS = 15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15. 0,15.000,15.000, MHz_MAX_RX_LOSS = 15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15. 0,15.000,15.000, MHz_MAX_RX_LOSS = 15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15. 0,15.000,15.000, MHz_MAX_RX_LOSS = 15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15. 0,15.000,15.000, MHz_MAX_RX_LOSS = 15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15.000,15. 0,15.000,15.000,MHz_MIN_RX_LOSS = -10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.00 00,-10.000,-10.000,-10.0000, MHz_MIN_RX_LOSS = -10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.00 00,-10.000,-10.000,-10.-1990MHz_MIN_RX_LOSS = -10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.00 00,-10.000,-10.000,-10.-2620MHz_MIN_RX_LOSS = -10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.00 00,-10.000,-10.000,-10.-2400MHz_MIN_RX_LOSS = -10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.000,-10.00 00,-10.000,-10.000,-10.0000, [TDSCDMA TPC table] 功率控制选择，默认为 OFFSET=0 时为 24db，修改成 OFFSET=1 时为 25db，修改成 OFFSET=-1 时 为 23db MHz_TPC_WANTED_P_OFFSET=0 MHz_TPC_WANTED_P_OFFSET=0 MHz_TPC_WANTED_P_OFFSET=0 MHz_TPC_WANTED_P_OFFSET=0 MHz_TPC_WANTED_P_OFFSET=0 TDSCDMA_TPC_P_DL = -60 MHz_MAX_POWER_H = 24.0,24.0,24.0,24.0, 校准失败提示 PA 功控超标，提高该值 MHz_MAX_POWER_M = 24.0,24.0,24.0,24.0, 实测值，一般在此处修改功率 MHz_MAX_POWER_L = 24.0,24.0,24.0,24.0, MHz_MIN_POWER_H = 0.0,0.0,0.0,0.0, MHz_MIN_POWER_M = 0.0,0.0,0.0,0.0, MHz_MIN_POWER_L = 0.0,0.0,0.0,0.0,MHz_MAX_POWER_H = 24.0,24.0,24.0,24.0, 校准失败提示 PA 功控超标，提高该值 MHz_MAX_POWER_M = 24.0,24.0,24.0,24.0, MHz_MAX_POWER_L = 24.0,24.0,24.0,24.0, MHz_MIN_POWER_H = 0.0,0.0,0.0,0.0, MHz_MIN_POWER_M = 0.0,0.0,0.0,0.0, MHz_MIN_POWER_L = 0.0,0.0,0.0,0.0, MHz_MAX_POWER_H = 24.0,24.0,24.0,24.0, MHz_MAX_POWER_M = 24.0,24.0,24.0,24.0, MHz_MAX_POWER_L = 24.0,24.0,24.0,24.0, MHz_MIN_POWER_H = 5.0,5.0,5.0,5.0, MHz_MIN_POWER_M = 5.0,5.0,5.0,5.0, MHz_MIN_POWER_L = 5.0,5.0,5.0,5.0,MHz_MAX_POWER_H = 24.0,24.0,24.0,24.0, MHz_MAX_POWER_M = 24.0,24.0,24.0,24.0, MHz_MAX_POWER_M = 24.0,24.0,24.0,24.0, MHz_MIN_POWER_H = 5.0,5.0,5.0,5.0, MHz_MIN_POWER_M = 5.0,5.0,5.0,5.0, MHz_MIN_POWER_L = 5.0,5.0,5.0,5.0, MHz_MAX_POWER_H = 24.0,24.0,24.0,24.0, MHz_MAX_POWER_M = 24.0,24.0,24.0,24.0, MHz_MAX_POWER_L = 24.0,24.0,24.0,24.0, MHz_MIN_POWER_H = 5.0,5.0,5.0,5.0, MHz_MIN_POWER_M = -5,-5,-5,-5, MHz_MIN_POWER_L = -5,-5,-5,-5,MHz_MAX_FREQ_COMP 3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.,3.000,3.000, MHz_MAX_FREQ_COMP 3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.,3.000,3.000, MHz_MAX_FREQ_COMP 3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.,3.000,3.000, MHz_MAX_FREQ_COMP 3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.,3.000,3.000, MHz_MAX_FREQ_COMP 3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.000,3.,3.000,3.000,= = = = =MHz_MIN_FREQ_COMP = -3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.,-3.00 0,-3.-2025MHz_MIN_FREQ_COMP = -3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.,-3.00 0,-3.-1990MHz_MIN_FREQ_COMP = -3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.,-3.00 0,-3.-2620MHz_MIN_FREQ_COMP = -3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.,-3.00 0,-3.-2400MHz_MIN_FREQ_COMP = -3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.000,-3.,-3.00 0,-3.0000,[TDSCDMA NSFT Common Settings] TD 终测，有时不过可对应修改 ; BER from tester=Y // get BER BER from tester=N // get single-ended BER only BER from tester =Y RSCP Test =N[TDSCDMA NSFT Test Case_1] Channel = 9500 A 段终测信道 Cable Loss (dB) = 0.5 Max Power Average High (dBm) = 25.0 Max Power Average Low (dBm) = 21.0 Min Power Average High (dBm) = -49 功率 IQ OriginOffset (dB) = -25.0 ACLR 1.6M (dB) = -33.0 ACLR 3.2M (dB) = -43.0 BER Level (dBm) = -108 BER Limit (%) = 0.1 EVM RMS Max= 17.5 Frequency Error Peak (Hz) = 200 OBW MAX = 1.6 ON/OFF Power Area1(dBm) = -65 ON/OFF Power Area2(dBm) = -50 ON/OFF Power Area3(dBm) = -65 ILPC REL1POW (dB)= 0.5 RSCP Test1 (dBm)= -23 RSCP Test2 (dBm)= -65 RSCP Test3 (dBm)= -85 RSCP Accuracy (dB)= 2[TDSCDMA NSFT Test Case_2] Channel = 10087 F 频段终测信道 Cable Loss (dB) = 0.5 Max Power Average High (dBm) = 25.0 Max Power Average Low (dBm) = 21.0 Min Power Average High (dBm) = -49 IQ OriginOffset (dB) = -25.0 ACLR 1.6M (dB) = -33.0 ACLR 3.2M (dB) = -43.0 BER Level (dBm) = -108 BER Limit (%) = 0.1 EVM RMS Max= 17.5 Frequency Error Peak (Hz) = 200 OBW MAX = 1.6 ON/OFF Power Area1(dBm) = -65 ON/OFF Power Area2(dBm) = -50 ON/OFF Power Area3(dBm) = -65 ILPC REL1POW (dB)= 0.5 RSCP Test1 (dBm)= -23 RSCP Test2 (dBm)= -65 RSCP Test3 (dBm)= -85 RSCP Accuracy (dB)= 2[TDSCDMA NSFT Test Case_3] ;Channel = 11750 ;Cable Loss (dB) = -2.0 ;Max Power Average High (dBm) = 25.0 ;Max Power Average Low (dBm) = 21.0 ;Min Power Average High (dBm) = -49 ;IQ OriginOffset (dB) = -25.0 ;ACLR 1.6M (dB) = -33.0 ;ACLR 3.2M (dB) = -43.0 ;BER Level (dBm) = -108 ;BER Limit (%) = 0.1 ;EVM RMS Max= 17.5 ;Frequency Error Peak (Hz) = 200 ;OBW MAX = 1.6 ;ON/OFF Power Area1(dBm) = -65 ;ON/OFF Power Area2(dBm) = -50 ;ON/OFF Power Area3(dBm) = -65 ;ILPC REL1POW (dB)= 0.5 ;RSCP Test1 (dBm)= -35 ;RSCP Test2 (dBm)= -65 ;RSCP Test3 (dBm)= -85 ;RSCP Accuracy (dB)= 2
赞助商链接
以下均以下跌买入为例, 来说明这两部分,下跌时出现的 TD 结构,称之为 TD 买入结构。 1. TD 买入结构是这样形成的: (1)首先,要出现熊市价格反转,或称之为...TD提升机说明书_信息与通信_工程科技_专业资料
暂无评价|0人阅读|0次下载|举报文档TD提升机说明书_信息与通信_工程科技_专业资料。目录 1.用途及特点---2 2...21 7 TD 中各主题的说明信息 ... 22 7 TD 管理流程 ... 24 7.1 时间安排 ......TD.EXE简要使用说明_工学_高等教育_教育专区。td。exe使用简要说明TD.EXE 简要使用说明 TD. EXE(简称 TD)是一个具有窗口界面的程序调试器。利用 TD,用户能够调...关于MT6735方案CFG和ININ配置说明_计算机硬件及网络_...TDSCDMA MHz cable loss = 10.3 TD...PCS 以上为更改 2G 测试频段选项 [RX path...TD200 人机界面终端操作说明 1.终端面板各键位置及各键的功能下图是 TD200 人机界面操作终端面板: 面板各键的功能: ENTER 键:选择菜单,确认数据编辑 ESC 键:...实验内容说明采用环形组网方式时,需要 3 套 SDH ...tjtd39 tjtd40 tjtd39 tjtd40 2、做本实验之...:cfg- :cfg-get- 附该网元配置...2G/TD/LTE 分区需要不同颜色标示出来, 并且需文字说明各个小区的覆盖范围; 2G/TD/LTE 小区覆盖区域必须为同一个 区域,中间不能有穿插,特殊情况比如 TD 的 2...文档中的 UBX Protocol 下的 CFG 项(UBX-CFG)的...Terror :时间误差; tdop :无效时间,参考协议文档 ...10 图 1-13 默认配置 1.4 模块天线说明 LEA-5T ...2G加3G邻区说明_计算机软件及应用_IT/计算机_专业资料。BSC级指令: RLDEI:CELL=TB1SDX1,EXT,UTRAN; 在BSC下增加TDCELL(TB1SDX1)为外部3G小区 RLDEC:CELL=...
All rights reserved Powered by
www.tceic.com
copyright ©right 。文档资料库内容来自网络，如有侵犯请联系客服。}
我要回帖
更多关于 meta工具 的文章
更多推荐
- ·英语四级听力大概多少分才算合格呀一般多少分及格
- ·南京信息学院领导名单工程大学现任领导
- ·浙江哪个艺考机构排名好？朋友们解答下
- ·张继勋朔州市山西省委组织部刘世华干部教育科科长
- ·杭州雅思培训机构十大排名榜英国留学哪个机构好？能告知一下
- ·少年凯 -焕篮 未来 王俊 凯拽mp3.
- ·内全卡的全民k歌怎么保存歌曲样存手机内
- ·少年凯 王俊 凯拽mp3 百度云。
- ·有什么可以挣钱的手机软件在手机上赚钱的好办法
- ·大约是11年或者12年时定的少电，赠送了一个时代是多少年游戏机，不知道叫什么
- ·电脑硬盘声音很大关机硬盘有很大的摩擦声怎么回事
- ·什么手机适合玩游戏比较适合玩游戏，2000-3000左右
- ·外星人电脑上门维修延保维修要钱么
- ·苹果手机微信能上锁吗可以锁微信吗
- ·2604f仪表电脑休眠模式式
- ·合约说明 标准4g资费合约优化版：语音: 0.15元/分钟 | 流量：0.15元/M | 短信：0.1元/条
- ·小米4c手机小米手机设置来电铃声声
- ·当兵玩手机被汽车贴黑顶抓到罚多少会被罚钱吗，还是三个月工资这样
- ·请问这个话费是移动话费多少钱一分钟帮我看看
- ·动漫《神契幻奇谭动漫百度云》第23集百度云网盘MP4资源分享
- ·meta mtk meta工具连不上能写入NSFT 标志位吗
- ·手机经常玩游戏对笔记本电池玩游戏有没有影响？
- ·lenovo电池不充电 L440 无法一边使用一边充电
- ·广东佛山职称查询的朋友能帮我查一下四川省南充市高坪区青居镇顺江村一社雷葵花的手机号码吗
- ·国美合格证排名是指偶像练习生 总排名名吗?还是单类偶像练习生 总排名名?
- ·原煤矿是村办后私人煤矿买了我的工令怎样算
- ·上班给供货人报数量，给我回扣怎么做账我没有加价和扣斤少两，单据都是其他人签收，领导说我吃回扣怎么做账辞退我怎么办？
- ·2018你知道网看视频2018建行洗车卡网点查询
- ·缅甸语言缅甸语日常用语900句100
- ·国企混改职工就完了职工单位没活放假回家工资怎么算
- ·写给儿子唯美的简短的青春寄语语
- ·四川能投凉山能源投资德农生物能源股份有限公司
- ·有放射性的放射性同位素有哪些些？
- ·如何让网站让百度收录自己的网站的页面增加？
- ·QQ邮箱发来您的光大信用卡提额申请请以通过请核对资料AD是什么意思
- ·总平面图上的坐标只有二个坐标,是1栋的，其他2345栋一个坐标没有，如何生成其他4栋基础坐标？
