人人网 - 抱歉
哦，抱歉，好像看不到了
现在你可以:
看看其它好友写了什么
北京千橡网景科技发展有限公司：
文网文[号··京公网安备号·甲测资字
文化部监督电子邮箱：wlwh@··
文明办网文明上网举报电话： 举报邮箱：&&&&&&&&&&&&您所在位置： &
&nbsp&&nbsp&nbsp&&nbsp
鸡西矿业集团滴道矿1.5Mta新井设计.doc103页
本文档一共被下载：
次 ,您可免费全文在线阅读后下载本文档
文档加载中...广告还剩秒
需要金币：100 &&
你可能关注的文档：
··········
··········
全套设计CAD图纸，联系QQ
各专业都有
本设计矿井为鸡西矿业集团滴道矿1.5Mt/a新井设计，共有4层可采煤层，分别为17#、18#、23#和34-2#层，平均总厚度8.4米，煤层倾角在16°―23°之间，煤质多数为焦煤和1/3焦煤。设计井田的工业储量163.09Mt，可采储量123.08Mt,服务年限为59a。本矿井设计采用双立井方案开拓，划分为二个水平，分别采用上下山开采，一个工作面达产。采用分组集中布置，工作面采用刮板运输机运输，运输平巷采用带式运输机，大巷采用10吨架线式电机车牵引3吨底卸式矿车运输。采煤方法为走向长壁采煤法，采煤工艺采用综合机械化采煤工艺。年工作日为330d，采用“三、八”式工作制，工作面长为230m，每刀进度为0.8m，每日割8刀。
关键词：可采储量；
走向长壁；
The task of this design is to construct a 1.5million tons new shaft for Jixi Ming Administration.This mine has four minable Coal Seam,they are 17# 18# 23# and 34-2# ,and its average thickness is 8.4meters,The luff of coal sean is between16°and 23°,the quality of coal almost is coke and one third coke.The industrial reserves of design shaft is 163.09million tons.Designed field of minable capacity is123.08million tons. It can adapt for 59years.
This mine shaft is applied to double indined shaf and is divided into two level. Layout of gathing gallergand mining di This level is divided into 8 mining districts. 1 faces reach to ptoduce. With a pair of concentration, big alley is arranged, big alley adopt the wiring type generator vehicle of 10t pull the base of 3t unload type mine vehicle transportation, with tape transportation oblique alley, connect every coal seam, the method of coal mining slope the wall of coal mining to incline.
Adapt “theree-eight” work situation, work face is 230 meter
正在加载中，请稍后...【图文】模块二 数控系统及其参数调试_百度文库
两大类热门资源免费畅读
续费一年阅读会员，立省24元！
评价文档：
模块二 数控系统及其参数调试
上传于||文档简介
&&数​控​机​床​故​障​诊​断​与​维​修​(​第​三​版​)​-​杨​中​力
大小：1.91MB
登录百度文库，专享文档复制特权，财富值每天免费拿！
你可能喜欢您可以在塑型过程中随时使用「导出元件」工具，而不仅仅对零件中的第一个特徵使用。
You can use the Derived Component tool at any point in the modeling process, not just as the first feature in a part.
同样，如果正在创建要用作零件数据库的文档，那么在发票上如何对零件排序的细节也许并不重要。
Similarly, if you are creating a document that is going to be used as a parts database, the specifics of how the part has been ordered on invoices may not be important.
工艺方案是零件加工的工艺基础，对零件的生产制造过程起指导性作用，决定着零件的生产率和制造成本。
The process plan is the technology foundation of part machining, and takes guidance for the part manufacture, and decides the productivity and the manufacturing cost of the part.
在数控加工中，灵活的运用刀具半径补偿值对零件进行合理的工艺安排，既可以节省程序，又可以提高加工效率。
In NC machining, applying reasonable processing arrangement on parts by flexibly using compensation value of tool radius can not only save the program but also increase the processing efficiency.
对零件特征按加工过程中几何拓扑结构以及功能进行分类和定义。
The part features were classified and defined according to the geometric topology and functions in part machining.
学习了如何将组合的显示从描影显示变更为线架构显示，以便对零件位置进行可选的可视检验。
Learned to change the display of your assembly from shaded to wireframe display for optional visual inspection of part positions.
通过对零件拓扑面建立编码，提出了虚拟零件和虚拟元素的概念，建立了虚拟零件模型；
The concept of the virtual part and virtual component are proposed and the virtual part model is built up by coding the faces of parts.
对零件加工质量和精度要求越来越高。
For parts processing quality and precision demand is higher and higher.
在零件标准化和规范化基础上，采用事物特性表能够对零件族进行描述。
On the basis of standardization and normalization, a part family can be described by tabular layouts of article characteristics(SML).
不少兵器在设计和生产定型时都需要进行成套的尺寸链计算，以便对零件的可装配性进行检验，保证系统的精度要求。
Many arms demand dimensional chain calculation in process of design and finalize the design in order to test the assembly characters of the parts and assure the system precision requirement.
由于毛坯外形对零件的成形质量影响很大，本文还分析了毛坯圆角对零件成形的影响，最终确定了合理的毛坯形状和尺寸。
Because the blank shape affect the quality of piece forming greatly, here the influence of blank fillet on piece forming is also analyzed, the suitable blank shape and dimension are finally gained.
建立了盒形油箱零件的有限元模型，研究分析不同厚度、不同材料拼焊板的成形及焊缝对零件成形的影响。
The finite element model of a boxy part was founded, and the formability of tailor-welded blank with different thickness and material was studied.
零件表面质量对零件的耐磨性、抗疲劳强度、接触刚度等使用性能和寿命有很大的影响。
It is well known that surface quality of parts has great influence on the operational performance such as wearing quality , figure strength and contact stiffness.
机械工程师可对零件施加强大的力量，如果零件支撑得了，即可假设物件在承受较弱的力道时不会失效。
A mechanical engineer can stress a component with a large force and assume that if it survives it will not fail when subjected to a slightly smaller force.
对零件进行翻边，测量出翻边前后在修边区域上各网格点的坐标；
The coordinates of mesh points on the trimming region before and after flanging are measured.
通过对零件的工艺性分析，设计出合理的钻模来保证产品质量，提高生产效率。
By analyzing part process, a reasonable drill hole die is designed, the product quality and the production efficiency are improved.
在表面粗糙度的影响因素和影响规律方面：主要研究了残留面积高度、走刀行距、每齿进给率和最优化走刀路径对零件加工表面粗糙度的影响。
For influence factors and rules of machined surface roughness, we studied on the influence factors of machined surface roughness such as scallop-height, path interval, feed rate and optimum tool path.
数控机床进给运动的精度对零件的加工精度有极大的影响。
The machining accuracy is greatly affected by the feed movement precision of the NC machine.
但目前的在线检测技术通常难以对零件形位误差进行在线测量。
But it is often difficult to measure the form and position error by on-line measurement system nowadays.
本设计进行了一款开关座的注塑模设计，对零件结构进行了工艺分析。
This paper presents the design of a molding model of switch and its process analysis.
消除偏置曲线自交点可以提高系统对零件细节部分的处理能力，提高了零件的制造精度。
Eliminating offset self-intersection could improve the ability to handle the detail of parts and the precision to make the parts.
文中给出了激光-CCD测量零件尺寸的原理，对零件运动过程中厚度尺寸的双路补偿原理进行了理论分析；
The principle of laser-CCD measuring parts dimensions is given, and double compensating principle of the parts thickness dimension during parts automatic delivery is analyzed.
根据对零件制造精度和效率的关注程度的不同，开发出了多种分层算法。
Since there were different concerns about precision and efficiency of part's manufacturing, various slicing algorithms were developed.
以某阶梯轴为例，表明利用基于本体的零件描述模型对零件信息进行表达，可以更加合理有效地描述领域本体知识库中的零件信息。
Taking a stepped shaft as example, the paper shows the part information expressed with the part description model based on ontology can describe the part rationally and effectively.
通过对零件的加工工艺进行分析，将能合并的工步源程序串在一起并在实际加工中得到验证从而实现自动换刀加工。
According to analysing the machining technology of part, combine the original procedures which can be incorporated and test them in actual processing thus achieving automatic changing tool machining.
利用永久磁体及磁性磨料对零件表面进行研磨，是磁力研磨中的一种新方法。
To grinding part surfaces with permanent magnet and magnetic grains is a new method of magnetic grinding.
本文通过机械优化设计理念，对零件孔加工的路线和数控程序的编制进行了优化设计。
In this thesis, the thought of optimal design of the machine, the processing route of parts and the program of the NC program are excellently designed.
因此，在齿轮传动设计时，对零件的磨粒磨损可靠性设计、具有广泛的灵活性和适用性。
It can be widely used in the design of wear resistance of gear drive's parts.
本文介绍的将模式性知识引入到冷挤压工艺设计过程中，对零件进行特征编码完成信息转换的方法可以有效地解决这个问题。
This paper introduces the method that applies the code knowledge into cold extrusion process planning and transforms the information into feature code for the parts.
对零件表面进行光整加工和清除毛刺，是提高零件表面质量的重要环节。
The finishing-and deburring-processes constitute on important link in machining and they insure the surface qualities of parts.
点击关注有道词典
$firstVoiceSent
- 来自原声例句
请问您想要如何调整此模块？
感谢您的反馈，我们会尽快进行适当修改！
请问您想要如何调整此模块？
感谢您的反馈，我们会尽快进行适当修改！}